Hydraulic Limb Snipper

   / Hydraulic Limb Snipper #11  
I bought one of these and use it in my grapple circuit. LIMBHOG.com It is not always a perfect cut but on my farm it does a great job. I can cut more in one hour that uses to take a full day.
 
   / Hydraulic Limb Snipper #12  
Good video of the hog two questions .
Price of cource LOL
But does the bar have some sort of oiler?
 
   / Hydraulic Limb Snipper #13  
While the limb clipper looks like a good idea I have a concer about it's use if you want to keep the trees healthy. Many people without pruning experience tend to cut the limb leaving too long a stub or cut too close to the trunk cutting off the branch collar. Either case is an invitation for disease and rot to get started.

If you are looking for healthy trees be careful how you prune them.
 
   / Hydraulic Limb Snipper #14  
Many people without pruning experience tend to cut the limb leaving too long a stub or cut too close to the trunk cutting off the branch collar. Either case is an invitation for disease and rot to get started.
So what's the proper length?
 
   / Hydraulic Limb Snipper #15  
I bought one of these and use it in my grapple circuit. LIMBHOG.com It is not always a perfect cut but on my farm it does a great job. I can cut more in one hour that uses to take a full day.

Not exactly cheap at $2200 but if you had a lot of pruning to do it would be a nice bit of equipment to have.
 
   / Hydraulic Limb Snipper #16  
In California News: Something like that could be used to reach into a manhole and snip all the fiber optic cables.:D
 
   / Hydraulic Limb Snipper #17  
I sure could use something like this to cut down about 6 bushes on a bank that are up to 3 inches in diameter.

Whish I knew whereI could rent one for 2 or 3 hours.
 
   / Hydraulic Limb Snipper #19  
The bar does have a self oiler. Like anything else there is a learning curve to using this. Proper position and blade angle yields very nice cuts. Very small diameter limbs will hang in the chain so it has to be spinning to get them. I bought a 8' extension and can cut reach most of the limbs I want cut.
 
 

Tractor & Equipment Auctions

1997 Cat 953C Crawler Loader (RIDE AND DRIVE) (A50774)
1997 Cat 953C...
2011 Ford Crown Victoria Sedan (A51694)
2011 Ford Crown...
2021 JCB 1CXT Skidloader/Backhoe (RIDE AND DRIVE) (LIKE NEW) (A50774)
2021 JCB 1CXT...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2019 INTERNATIONAL LT625 TANDEM AXLE SLEEPER (A52141)
2019 INTERNATIONAL...
Wolverine Slide on Manure Forks (A50515)
Wolverine Slide on...
 
Top