How to release hydraulic lines

[Rally Farm]

I know this is a dumb question but I just bought this property which came with a 95 JD 6400. I don't have a manual yet and have never owned a tractor before. It has a MX 15 attached and I don't know how to disconnect the lines going to the bush hog. Looks like something needs to release the ball bearings inside the socket. Any help would be appreciated. Thank you.

-Lance

 

[beenthere]

There are no dumb questions.

You just slide/push the outside ring that captures the ball bearings towards the tractor. Do the opposite to reconnect the coupling.

video..(listen carefully due to the Indian accent which makes you feel like you are at Motel6 or have a computer question)..
https://www.youtube.com/watch?v=HyUuOUDMKms

:welcome: to TBN

 

[Rally Farm]

Thanks, I'll try that.

 

[aczlan]

Make sure you lower it down all the way first, or you will have a hard time getting the lines to reconnect afterwards.

Aaron Z

 

[Rally Farm]

I'm not sure where the ring would be on these?

It's obviously something simple and I don't see it so its killing me. I will have to go into hiding after I find the answer.

 

[aczlan]

I suspect that the ring is what the flip up cover mounts to

Aaron Z

 

[Rally Farm]

So just pull hard on the hose to remove it?

 

[aczlan]

So just pull hard on the hose to remove it?

Sorry, I looked at the one picture, but not the other. See my edited post.

Aaron Z

 

[aczlan]

Looks like I might have been right the first time per: OMAL152877: 6010, 6110, 6210, 6310 and 6410 Tractors( 266767-      ), Block File: AG_OU12401_220_19_07APR00.htm
See http://manuals.deere.com/omview/OMAL152877_19/ for the full manual.

Aaron Z

 

[Rally Farm]

Awesome, thank you.