How to maintain wooded walking trails

   / How to maintain wooded walking trails #12  
If I want to open or pack my trails - a pass or two with my ATV. If I wanted to get fancy - reverse my rear blade and pack the snow down.
 
   / How to maintain wooded walking trails #14  
Just a data point; Sport sleds are not made for work and go slow. They use a tunnel heat exchanger which do not get enough snow on them when you go slow and pull implements.
 
Last edited:
   / How to maintain wooded walking trails #15  
Just a data point; Sport sleds are not made for work and go slow. They use a tunnel heat exchanger which do not get enought snow on them if you go slow eought to pull things.
agree at 100% but if there is 3 to 4 inch powder then it will be ok and for short distance it is fine even on snow pack but yes you need to keep a eye on the temperature.
 
   / How to maintain wooded walking trails #17  
Some of us are quite serious about grooming trails and done it for many, many years. :D😁🤣😁
Rhino works in the dark, front view. (LG).jpg


This is our personally owned machine.
bossgroomspretty294.jpg


A trail Bully 400
arly PB 847.jpg


Various sleds over the years I've used.
Arly grooms on IQ.jpg
Grooming river trail Dec 08.jpg
 
Last edited:
   / How to maintain wooded walking trails #18  
I have tried with an RTV900 (no tracks) and you'd have to be out there before it got really deep. I would set the plow up a bit and go, but often get stuck as I'll drive up on a drift and not know it until I sink in. With the tractor I have done it using 3 skidsteer tires bolted together in a V with an eye-bolt to hook it to the tractor.

 
   / How to maintain wooded walking trails #19  
I’d guess that a roller of some kind might do the best job of packing the snow hard enough that it doesnt just form a crust that collapses under weight of someone.
 
   / How to maintain wooded walking trails #20  
I’d guess that a roller of some kind might do the best job of packing the snow hard enough that it doesnt just form a crust that collapses under weight of someone.
Yes, a roller thats a bit wider than your tow machine and does not stick to snow. That would be HDPE plastic. It would look like this.
roller.jpg
 

Tractor & Equipment Auctions

2 Vintage Metal Signs (A48081)
2 Vintage Metal...
2007 FORD F-450 (A50854)
2007 FORD F-450...
2017 John Deere 30G Mini Excavator (A50322)
2017 John Deere...
2017 Dodge Ram 1500 4x4 Crew Cab Pickup Truck (A50323)
2017 Dodge Ram...
2013 John Deere 640FD Flex Draper Head (A50657)
2013 John Deere...
2011 V.E. ENTERPRISES 130 BBL STEEL VACUUM TANK TRAILER (A50854)
2011 V.E...
 
Top