How long should it last?

   / How long should it last?
  • Thread Starter
#11  
Well, I did check the tank for leaks, and found none. I was appalled at how fast it went. As for pretty welds with the CO2 Argon mix, vs. the straight CO2, I think the flux core welds look pretty decent, if that's any indicator.

Maybe I will check on the CO2 price.

I will also try to lower the pressure too.
 
   / How long should it last? #14  
If your talking ltr/min I run mine at between 15 & 17 ltr/min depending on wind, lasts pretty well, only refill once or twice a year, and I do a lot of weekend welding. Prob go through about 2-3 bottles to 15kg of 0.9mm wire

Flux cored wire sucks, tried that before, ended up going back to a stick welder, easier and cleaner, plus much stronger welds.
 
   / How long should it last? #16  
If your talking ltr/min I run mine at between 15 & 17 ltr/min depending on wind, lasts pretty well, only refill once or twice a year, and I do a lot of weekend welding. Prob go through about 2-3 bottles to 15kg of 0.9mm wire

Flux cored wire sucks, tried that before, ended up going back to a stick welder, easier and cleaner, plus much stronger welds.

Have you ever tried using FabShield 21 B not 23 by Hobart?
I find the slag is easy to deal with, it is a brown-orange powered like talk and just brushes off.

http://www.hobartbrothers.com/pdf/datasheets/Fabshield21B.pdf
 
   / How long should it last? #17  
My supplier puts the gauges on tanks and makes sure they are filled like they should be before I purchase. I don't keep track of usage. I use CO2 was $20 on last fill up.
 
   / How long should it last?
  • Thread Starter
#18  
Well I thought it was all psi, just assumed, but will look at the gauges to see. As for the flux core, I seem to actually be able to get good welds more often than with the gas. Of course I am not a real good welder either.

One thing I really have trouble with, using gas/solid wire, is when you're welding inside a corner or tight spot that doesn't allow the gas to shield it very well.
 
   / How long should it last? #19  
Well I thought it was all psi, just assumed, but will look at the gauges to see. As for the flux core, I seem to actually be able to get good welds more often than with the gas. Of course I am not a real good welder either.

One thing I really have trouble with, using gas/solid wire, is when you're welding inside a corner or tight spot that doesn't allow the gas to shield it very well.

Flux core runs a bit hotter than the same size solid wire, because the flux core reduces the cross sectional area.
You really need to try Hobart Fabshield 21B.
 

Tractor & Equipment Auctions

2007 Peterbilt 335 Mickey AO-A Battery Truck (A50323)
2007 Peterbilt 335...
2015 WESTERN STAR 4900 SF (GLIDER) (A50854)
2015 WESTERN STAR...
2011 Cadillac SRX LUXURY (A50324)
2011 Cadillac SRX...
GARDNER DENVER 480 VOLT AIR COMPRESSOR (A50854)
GARDNER DENVER 480...
19011 (A48082)
19011 (A48082)
2007 STERLING L9500 MIXER TRUCK (A50854)
2007 STERLING...
 
Top