Halsaver
New member
Curious how to level arms on a 3 pt hitch
How level arms
- Thread starter Halsaver
- Start date
- Views: 1018
GPintheMitten
Elite Member
- Joined
- Sep 8, 2009
- Messages
- 3,331
- Location
- Flushing, Michigan
- Tractor
- Kubota B2620 with BH65 backhoe, Ford 2N
http://www.tractorbynet.com/forums/...24-bx24-step-step-attach-3-a-3point_hitch-jpg
Take look at this picture. The arm on right is adjustable. Loosen the top locking nut then turn the threaded pipe in the middle to shorten or lengthen the arm. Then tighten the lock nut.
Take look at this picture. The arm on right is adjustable. Loosen the top locking nut then turn the threaded pipe in the middle to shorten or lengthen the arm. Then tighten the lock nut.
GPintheMitten
Elite Member
- Joined
- Sep 8, 2009
- Messages
- 3,331
- Location
- Flushing, Michigan
- Tractor
- Kubota B2620 with BH65 backhoe, Ford 2N
You might want look at this
Kubota Three Point Hitch Overview - YouTube
Kubota Three Point Hitch Overview - YouTube
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,560
:welcome:
I'm going to move your thread to somewhere with a bit more traffic in case you end up needing more advice.
I'm going to move your thread to somewhere with a bit more traffic in case you end up needing more advice.
Here are some similar links:
Rear Finish Mower
How to narrow a three-point attachment arms
Pat's Easy Change
Hydraulic top link. Will it be too short?
