ralanb
Bronze Member
- Joined
- Oct 13, 2009
- Messages
- 67
- Location
- Horry County
- Tractor
- Cat d-3, Cat 268-B (toasted), Cat 320, more to come.
Does anyone on here know anything about a programmer to increase the horsepower on a skid steer?
Horsepower programmers
- Thread starter ralanb
- Start date
- Views: 3297
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
If you have a mechanical fuel injection system, it ain't gonna happen with a 'chip'. Unless you have a very large SSL that is Tier III emissions compliant or a large SSL that is Tier IV compliant, it is probably a mechanical fuel system.
Complete
Bronze Member
- Joined
- Jun 2, 2009
- Messages
- 63
Alan,
we are a dealer for programmers and what rick said unless its a big machine they don't make a programmer for it.
we are a dealer for programmers and what rick said unless its a big machine they don't make a programmer for it.
OP
ralanb
Bronze Member
- Joined
- Oct 13, 2009
- Messages
- 67
- Location
- Horry County
- Tractor
- Cat d-3, Cat 268-B (toasted), Cat 320, more to come.
Thanks guys. Just seen where it as a tier II. Thanks anyway.
All I know is that it doesn't make any sense to.
You HAVE all the power you can use, so WHY ?
Unless you have some other means to make it weigh more and/or lift more.....
Yeah, I still don't get it.
fishfactor
Gold Member
OP
ralanb
Bronze Member
- Joined
- Oct 13, 2009
- Messages
- 67
- Location
- Horry County
- Tractor
- Cat d-3, Cat 268-B (toasted), Cat 320, more to come.
Thank you fish factor. We do have added weight, and it helps with the steel tracks when we are pushing trees.
fishfactor
Gold Member
Running a mulcher, you need every HP you can get. Personally, I was excited when Bobcat announced the 870. 99 HP and the much needed cab upgrade. Then I got into the specs. The high flow is only 34 gpm. I'm no expert, but my 320 is 40 gpm, so I think I would loose performance if I switched. Maybe not, but seems dumb for them to leave the high flow lacking.
Still interested in the lamtrac, or the fecon 148 if I can catch a tiger like cbturf.
Still interested in the lamtrac, or the fecon 148 if I can catch a tiger like cbturf.
OP
ralanb
Bronze Member
- Joined
- Oct 13, 2009
- Messages
- 67
- Location
- Horry County
- Tractor
- Cat d-3, Cat 268-B (toasted), Cat 320, more to come.
Cb turf got it going on. I just hope that everything continues to go smooth for him so he can make it back to his family. Us small people need a good break every once in a while. I myself am waiting for this big bid openning. I will need help on it if i get this one.
fishfactor
Gold Member
I'm not too far from you if you are in Horry County, SC. I'd be happy to help if we could work the schedules out.
