Horse Mat for Soft Snow Blade Edge

   / Horse Mat for Soft Snow Blade Edge #51  
Here's another way to that skin cat. Buy 10" wide 2 ply belting from TSC. Cut/split belt to 5" wide. Drill holes and fit between the blade and the replaceable cut edge. The belt/wiper is about 1 inch lower than the replaceable cut edge.
The belt/scraper shows no wear, no noise in use. The wife is so happy with the results to her driveway! BTW, I was able to reuse the factory bolts/nuts. Cool Beans! /forums/images/graemlins/grin.gif
 
   / Horse Mat for Soft Snow Blade Edge #52  
Great idea with the slip-joint pliers. The mat is so heavy it is hard to hang on to and move. The pliers should do the trick /forums/images/graemlins/laugh.gif
PJ
 
   / Horse Mat for Soft Snow Blade Edge #53  
A friend got me a piece of heavy conveyor belt approx. 1/2" thick. I cut it to size with a utility knife and drilled holes in it. I made it about 3" longer than the metal cutting edge and it doesn't bend a bit.
 
   / Horse Mat for Soft Snow Blade Edge #54  
Thats a super idea
 
   / Horse Mat for Soft Snow Blade Edge #55  
Tom,
Where did your friend go to find a piece of conveyer belt?

OkieG
 
   / Horse Mat for Soft Snow Blade Edge #56  
Does anyone have experience to know if these rubber type edges remove much pea gravel on top of a seal coated driveway? I always have to have the metal plow blade about 3/4 to 1 inch off the ground. Wish I could get closer. Thanks
 
   / Horse Mat for Soft Snow Blade Edge #57  
Let me put it this way, my driveway is asphalt but on the end its gravel. With the horse mat I have not moved hardly any gravel from the driveway. Also when I plow off the driveway into the grass it does not damage the grass edges.
PJ
 
   / Horse Mat for Soft Snow Blade Edge #58  
When plowing my in-law's and neighbor's bluestone gravel drives, I use the rear blade with the rubber edge and don't move much gravel. When I have done this, the ground was pretty frozen and the drive was frozen too.
Mark
 
   / Horse Mat for Soft Snow Blade Edge #59  
</font><font color="blue" class="small">( Tom,
Where did your friend go to find a piece of conveyer belt?
)</font>

He works at an asphalt plant. It was a piece they were throwing away.
 
   / Horse Mat for Soft Snow Blade Edge #60  
Channel-locks is what I meant to say. The offset head, coupled with the ability to match the thickness of the mat gives you a good grab.

Yankee Bill
 

Tractor & Equipment Auctions

2020 INTERNATIONAL MV607 26FT NON CDL BOX TRUCK (A58018)
2020 INTERNATIONAL...
PALLET OF MISC PARTS & SUPPLIES (A58374)
PALLET OF MISC...
2015 Jeep Cherokee 4X4 SUV (A56859)
2015 Jeep Cherokee...
2007 Mercedes Benz S550 AWD Sedan (A56859)
2007 Mercedes Benz...
2018 Ford F-150 XLT Sport Pickup Truck, VIN: 1FTEW1EP6JFD27162, Crew Cab, 4 x 4, 2.7 L EcoBoost Gas (A59076)
2018 Ford F-150...
BARBED WIRE (A58214)
BARBED WIRE (A58214)
 
Top