Toplink Hooking up hydraulic top link

[Backlash]

I recently purchased a hydraulic top link for my NH TC35D. Do I need to do any type of bleeding process to fill it w/ fluid, or can I just hook it up and use it? Lines are included to fit my remotes and the TL, but I have not attached the lines to the TL yet.

Thanks in advance for your help

 

[Bill_M]

Mount your top link and work it full stroke sevaral times while holding the handle at the end of the stroke till you hear a load on the engine, this will get all the air out.
Note may have to do again in the future if you notice the cylinder seems spongy.