GeneV
Elite Member
Made a new one for myself out of a 5/8" screw. Total cost: $4 for the 3/4" cpvc pipe, for the handle.
home-cooked electrode holder
- Thread starter GeneV
- Start date
- Views: 1415
Fuddy1952
Elite Member
- Joined
- Apr 17, 2018
- Messages
- 4,332
- Location
- South Central Virginia
- Tractor
- 1973 Economy and 2018 John Deere 3038E
Very nice!
OP
GeneV
Elite Member
Thank you sir. So far just did quick welds with it, so can't attest how cool the handle will stay while running a bunch of continuous beads. But it's so comfortable to weld with though, I love it.
Fuddy1952
Elite Member
- Joined
- Apr 17, 2018
- Messages
- 4,332
- Location
- South Central Virginia
- Tractor
- 1973 Economy and 2018 John Deere 3038E
Great design and you could simply put that PVC into a larger piece if you need more insulation.
OP
GeneV
Elite Member
There's actually room in there to stuff in some sort of insulation if needed. Currently it's mostly an air gap in there between 5/8" diameter screw, and the cpvc 0.72" id. I got the screw pressing against one side of the inside of the cpvc pipe, held in place from the other side of the pipe with set screws I tapped into the cpvc. And then I drilled some corresponding dimples into the 5/8" screw to keep it all in place.
