Hitch drop

   / Hitch drop #1  

nap61

Silver Member
Joined
Dec 16, 2006
Messages
231
What would be the correct drop size for a truck with a 7" lift kit. It seems like it would need about a 10" drop. Does this sound reasonable?
Also, who would be the best vendor to but from - either a local store or on line?

Norm
 
   / Hitch drop #2  
Measure the hitch height of the trailer you are going to tow, level, to the ground, then measure from the receiver down to the ground on the truck. Subtract. =Drop required. Many trailer sit at different heights, so it is hard to do one size fits all, but that will probably get you something that should work in general.
 
   / Hitch drop #3  
You have to measure the trailer to know for sure. Make sure you account for spring compression when the trailer is attached.

As far as manufactures I would stick with Buyers. They make excellent quality hitches that are made in the USA! :D I would avoid the foreign stuff at Lowes and Wally World. A hitch is not the place to save a buck.

Northern Tool is one place that sells Buyers products. Also your local farm equipment store or farm truck supplier may have them. 7" drop is alot so you want a good quality solid forged hitch.

Good luck and don't forget good quality safety chains and hooks! :thumbsup:
 
   / Hitch drop
  • Thread Starter
#4  
Dave,
Thanks. That is what I did and I calculated 10". I haven't seen a hitch with that large a drop at the regular shops - O'Riley's, Auto Zone, WallyWorld, etc. I haven't tried U-Haul or a local trailer shop yet and didn't see anything close on line.

Norm
 
   / Hitch drop
  • Thread Starter
#5  
PapaPerk,
I am worried about the stress of that big of a drop. Is Buyers online or do they just sell through dealers?

Norm
 
   / Hitch drop #6  
Some WD hitches can be had with a deep drop and a reinforced shank. Most of the regular deep drops are only rated for 5000 lb or so. I've got a solid shank 2" drop class 5, the same hitch, same construction style in 8" drop is only a class 4.
 
   / Hitch drop #7  
Standard ball height measured from the ground to the top of the ball is 21" Hope this helps.

Chris
 
   / Hitch drop #9  
I think ive seen big drops at either Walmart or Northern tool?

Im thinking close to 10"s to unless its a huge equiptment trailer. Reason i say this is that a normal 4wd fullsize usually has about a 2-3" drop hitch already then you go lifting it 7"s which is just the suspention and dosent really account for a larger tire diameter which allows more ground clearance as well.
 

Tractor & Equipment Auctions

18018 (A51692)
18018 (A51692)
2001 HAULMARK ELITE II 8' X 24' CARGO TRAILER (A51247)
2001 HAULMARK...
2019 INTERNATIONAL 4400 SBA 4X2 SERVICE TRUCK (A51406)
2019 INTERNATIONAL...
2019 CATERPILLAR D6T LGP HI-TRACK CRAWLER DOZER (A51246)
2019 CATERPILLAR...
2025 K4525G UNUSED Double Garage Steel Barn (A53117)
2025 K4525G UNUSED...
2016 RAM 5500 Bucket Truck - Cummins Diesel - Auto Trans - 4X4 - Terex LT40 Boom (A53473)
2016 RAM 5500...
 
Top