WranglerX
Super Member
Brophy doesn't specifically say replacement nuts only states it has NF nuts.... 1x14 is not NF....
And TSC does not state thread pitch....
NF is defined as 1x12tpi...
Dale
Hitch Ball Threads?
- Thread starter Diggin It
- Start date
- Views: 22409
Brophy doesn't specifically say replacement nuts only states it has NF nuts.... 1x14 is not NF....
And TSC does not state thread pitch....
NF is defined as 1x12tpi...
Dale
Reb954
Platinum Member
It is best to use a thread gauge or measure how many threads there are so you are sure.
Scroll down about half way and read the paragraph after the chart.
Unified Thread Standard - Wikipedia
Scroll down about half way and read the paragraph after the chart.
Unified Thread Standard - Wikipedia
OP
Diggin It
Super Star Member
I wasn't really sure, but it turns out the one I have is a 3/4" diameter shank. Whatever definition you want to use, it threads very nicely into a 1/2" galvanized pipe coupling. Don't ask me what made me try that.
Reb954
Platinum Member
There you go, problem solved. Now you have a back up nut you can use. :drink:
dnw64
Veteran Member
Yeah, I don't think I would be trusting that, other than MAYBE for an empty trailer...!
OP
Diggin It
Super Star Member
Yeah, not exactly a lot of structural integrity there.
WranglerX
Super Member
Got a responds e-mail from tech at e-trailer.com....
A quote...
Dale,
Thank you for your email.
I show different brand and balls have different thread pitches so it will depend on the ball in discussion.
If you have any further questions, please email me at ChelseyS@etrailer.com or call 1-800-298-8924 extension 79360.
Thank you,
Chelsey S.
1-800-298-8924 x. 79360
My direct line is 1-636-887-9360
ChelseyS@etrailer.com
Online at Trailer Hitches & Vehicle Accessories (8 )298-8924
And there you have it....
Dale
A quote...
Dale,
Thank you for your email.
I show different brand and balls have different thread pitches so it will depend on the ball in discussion.
If you have any further questions, please email me at ChelseyS@etrailer.com or call 1-800-298-8924 extension 79360.
Thank you,
Chelsey S.
1-800-298-8924 x. 79360
My direct line is 1-636-887-9360
ChelseyS@etrailer.com
Online at Trailer Hitches & Vehicle Accessories (8 )298-8924
And there you have it....
Dale
Well that cuts the possibilities down to 10 different thread pitches in 3/4".:laughing:
View attachment Machinery's Handbook.jpeg
View attachment Machinery's Handbook.jpeg
ruffdog
Super Star Member
- Joined
- Dec 31, 2011
- Messages
- 10,756
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
Standard fine thread....3/4-16, 1-14, 1 1/4-12. Lawn mower balls with internal thread...3/4-10
John Fitzgerald
Gold Member
Most hardware stores only carry coarse thread nuts in sizes above 1/2", I have found. I prefer a grade 5 or better nut for hitch balls, although there is not much if any "pull out" force with a properly loaded and balanced trailer. In use, almost all the stress is against the side of the shank, in shear.