High pitched bearing squeal on T2220

   / High pitched bearing squeal on T2220 #1  

The Haymaker

Veteran Member
Joined
Jul 11, 2009
Messages
1,165
Location
Benton, Maine
Tractor
2008 T2220
Just as the topic says, when the tractor is cold and operated near full HST speed. At first I thought only in 3rd range, but tonight (35 out) it did it in 2nd.

All I can tell is it is coming from under the tractor and can't tell the "where". Seems any noise would be echoed upward from the ground anyway.

I can't "just make it happen", as it doesn't do it every time. Tomorrow I will wind some extra grease to the front drive sleeve in hopes that it is just that simple, but I have doubts. To me it is definitely a bearing squeal.

I know this is a shot in the dark question, but am hoping someone else can say "I had that happen"
 
   / High pitched bearing squeal on T2220 #2  
My TC29DA had a severe bearing squeal coming from somewhere down low. Intermittent, sometimes it would do it and then it wouldn't. I greased the front drive sleeve with about 20 pumps on the grease gun and it completely fixed it. Try that first. Grease it heavily.
 
   / High pitched bearing squeal on T2220 #3  
I'd almost guarantee that you are both correct in suspecting the front driveshaft tube.
 
   / High pitched bearing squeal on T2220 #4  
Do NOT discount the thought that it might be thick HST oil trying to go through your small HST filter and then activating your bypass valve. Good luck. Frank
 

Tractor & Equipment Auctions

2025 SDLANCH SDLE20 UNUSED Mini Excavator (A53117)
2025 SDLANCH...
2013 Nissan Sentra Sedan (A53424)
2013 Nissan Sentra...
Honda EU3000is Gasoline Companion Inverter Generators (A54811)
Honda EU3000is...
2016 GMC SIERRA 3500 SERVICE TRUCK (A51406)
2016 GMC SIERRA...
1998 CATERPILLAR 120H MOTORGRADER (A51406)
1998 CATERPILLAR...
2022 CATERPILLAR 980 WHEEL LOADER (A51246)
2022 CATERPILLAR...
 
Top