High pitched bearing squeal on T2220

   / High pitched bearing squeal on T2220 #1  

The Haymaker

Veteran Member
Joined
Jul 11, 2009
Messages
1,165
Location
Benton, Maine
Tractor
2008 T2220
Just as the topic says, when the tractor is cold and operated near full HST speed. At first I thought only in 3rd range, but tonight (35 out) it did it in 2nd.

All I can tell is it is coming from under the tractor and can't tell the "where". Seems any noise would be echoed upward from the ground anyway.

I can't "just make it happen", as it doesn't do it every time. Tomorrow I will wind some extra grease to the front drive sleeve in hopes that it is just that simple, but I have doubts. To me it is definitely a bearing squeal.

I know this is a shot in the dark question, but am hoping someone else can say "I had that happen"
 
   / High pitched bearing squeal on T2220 #2  
My TC29DA had a severe bearing squeal coming from somewhere down low. Intermittent, sometimes it would do it and then it wouldn't. I greased the front drive sleeve with about 20 pumps on the grease gun and it completely fixed it. Try that first. Grease it heavily.
 
   / High pitched bearing squeal on T2220 #3  
I'd almost guarantee that you are both correct in suspecting the front driveshaft tube.
 
   / High pitched bearing squeal on T2220 #4  
Do NOT discount the thought that it might be thick HST oil trying to go through your small HST filter and then activating your bypass valve. Good luck. Frank
 

Tractor & Equipment Auctions

2018 Allmand Night-Lite V-Series S/A Towable Light Tower (A52377)
2018 Allmand...
UNKNOWN 16 T/A TRASH TRAILER (A53843)
UNKNOWN 16 T/A...
2011 EAGER BEAVER 35G SL DETACH TRAILER (A52706)
2011 EAGER BEAVER...
2025 Swict 66in Bucket Skid Steer Attachment (A53421)
2025 Swict 66in...
2012 UNVERFERTH 10-INCH FRONT WHEEL SPACER FOR 10 BOLT HUB (A53473)
2012 UNVERFERTH...
2011 Mercedes Benz Sedan (A51694)
2011 Mercedes Benz...
 
Top