Help with glow plugs

/ Help with glow plugs #1  

decableguy2000

Bronze Member
Joined
Aug 1, 2004
Messages
50
Help me figure out if my glow plugs are going bad. I have a Farmtrac 300 DTC with a Mitsubishi S4L 1.5L engine. Hard starting when temps drop to around freezing. The book says the standard is .55 ohms. mine are reading .7-1.7 ohms. Should I replace them

Also need a cross reference for the glow plug to Mitsubishi #32a6603100, markings on the plug JA31M 10.5v h6b5
 
/ Help with glow plugs #2  
Better to find a way to measure current flow through each injector when energized . Glow plugs or not , plug the block heater in to pre-warm the engine .
 

Marketplace Items

2019 Westinghouse WSTBT1503 Wireless Speaker (A61574)
2019 Westinghouse...
Tan Jet Dock Drive-On (A59228)
Tan Jet Dock...
121A (A63745)
121A (A63745)
2014 International WorkStar 7500 T/A Leach 2RIII 25Yd Rear Loader Garbage Truck (A61573)
2014 International...
2017 Ford Transit 250 Cargo Van (A61573)
2017 Ford Transit...
Informational Lot - Financing (A63689)
Informational Lot...
 
Top