Help with glow plugs

/ Help with glow plugs #1  

decableguy2000

Bronze Member
Joined
Aug 1, 2004
Messages
50
Help me figure out if my glow plugs are going bad. I have a Farmtrac 300 DTC with a Mitsubishi S4L 1.5L engine. Hard starting when temps drop to around freezing. The book says the standard is .55 ohms. mine are reading .7-1.7 ohms. Should I replace them

Also need a cross reference for the glow plug to Mitsubishi #32a6603100, markings on the plug JA31M 10.5v h6b5
 
/ Help with glow plugs #2  
Better to find a way to measure current flow through each injector when energized . Glow plugs or not , plug the block heater in to pre-warm the engine .
 

Marketplace Items

2022 Bobcat E42 (A64126)
2022 Bobcat E42...
New/Unused Landhonor 16ft x 13ft Metal Carport (A65583)
New/Unused...
2016 Ford F250 Crew Cab Service Truck (A64194)
2016 Ford F250...
New/Unused Wolverine 72in Quick Attach Brush Cutter (A65583)
New/Unused...
2005 Ford Explorer XLT 4x4 (A62613)
2005 Ford Explorer...
2001 Mack RD688S T/A Galbreath Roll Off Truck (A61573)
2001 Mack RD688S...
 
Top