Help with glow plugs

/ Help with glow plugs #1  

decableguy2000

Bronze Member
Joined
Aug 1, 2004
Messages
50
Help me figure out if my glow plugs are going bad. I have a Farmtrac 300 DTC with a Mitsubishi S4L 1.5L engine. Hard starting when temps drop to around freezing. The book says the standard is .55 ohms. mine are reading .7-1.7 ohms. Should I replace them

Also need a cross reference for the glow plug to Mitsubishi #32a6603100, markings on the plug JA31M 10.5v h6b5
 
/ Help with glow plugs #2  
Better to find a way to measure current flow through each injector when energized . Glow plugs or not , plug the block heater in to pre-warm the engine .
 

Marketplace Items

(2) Lights (A64119)
(2) Lights (A64119)
2023 Caterpillar 259D3 Compact Track Loader Skid Steer (A64194)
2023 Caterpillar...
2015 International WorkStar 7500 T/A Dump Truck (A61573)
2015 International...
2023 JOHN DEERE 450P LGP CRAWLER DOZER (A65053)
2023 JOHN DEERE...
2023 Kubota U48-5 Compact Excavator with Angle Blade and Hydraulic Thumb (A63689)
2023 Kubota U48-5...
2012 Komatsu PC200LC-8 Hydraulic Excavator (A64194)
2012 Komatsu...
 
Top