Help needed to service MF200 loader

[klwinter2]

1969 MF 200 Drott loader

I am changing the fluids in this noble beast.

I have changed the fluid FILTER and screen in the hydraulic reverser transmission.

NOW I can not for the life of me find the fluid drain port, filler port, dip stick or level hole.

Can anyone help.

Kenneth Winter:confused2:
East TN
423-526-1328

 

[sx1100]

Dip stick (fill through the dipstick hole) is on top of the transmission behind the dash pedestal (if you where sitting on the seat) on the left side. you will need a long funnel and a lot patience to fill it. I think I used a funnel with a hose attached to it.

If you where facing the left side of the machine facing it, looking at the circular bolt pattern where the final bolts to the trans., and imagined it was the face of a clock. the drain plug would be at six ( not sure if it is on the side or underneath, the book doesn't show it) and the level should be around 4.