Heavy equipment specs???

[Tags]

Does anyone know if there is a spot on the web to find equipment specs??I am looking for specs on a JD 244E or H wheel loader and am not having much success,any help would be greatly appreciated.

 

[jtn]

Here is the link to the JD website with the specs.

<A target="_blank" HREF=http://www.deere.com/en_US/cfd/construction/deere_const/docs1/noncurrent_loaders.html>244 Specs</A>

I think the 244 series has been replaced by the 304 if you are looking for a new model.

<A target="_blank" HREF=http://www.deere.com/en_US/cfd/construction/deere_const/wheelloaders/304h_construction_general.html?sidenavstate=11>304 Specs</A>

JT

 

[Tags]

jtn,
Thank you for the link.I actually went there already and could not get the file to open,so I was looking for other options for the specs.I am looking at a used 244E and didn't want to goto a dealer for the info,but I can if worse comes to worse.

 

[ScottAR]

I got it to open.

Yanmar engine 55 net hp 182 ft lbs
Two range Hystat 0-6.2 0-20 forward and reverse
lift capacity to full height 7250lb. Breakout 10,145 lb.
GP bucket 1 cu yd MP bucket .78 yd.
Operating weight 11,746 lb with GP bucket
Operating weight 12,205 lb with MP bucket

HTH, reply if you need more info.

 

[Tags]

Scott,
Thanks for the info,I really appreciate it.If you happen to have a spare second,do the specs happen to list the lift height to the bucket pins?If it does could you post it,it would be a great help.

 

[Hoeman00]

10' 4" to pins

 

[ScottAR]

10ft 4in.

 

[ScottAR]

I was a little slow on the draw that time... /forums/images/graemlins/grin.gif

 

[Tags]

Hoeman & Scott,
Thank you both very much for the info,it is greatly appreciated,and will not be forgotten /forums/images/graemlins/grin.gif