Grille Guard for Case Farmall 75C

[falcon5269]

Cant find a grille guard for my 2018 Case Farmall 75C. Called 2 dealers and they had no idea. There has to be something out there. Find it hard to believe that Case and New Holland don't make a beefed up Grille guard. SMH

I found these picks from a post in 2017. Says its a New Holland part # LDR10389380. Checked it. No such animal. ?????? Any help is appreciated.

 

[oosik]

Well - when somebody tells you where to find a grill guard - this is what you need to do to it. View attachment 682576

 

[Peter 315]

This ...............New Holland Guard Part # LDR1 - New Holland Rochester

 

[oosik]

Well - finally. That link and the NH web site are a tough nut to crack. Could be that I have HughesNet and really foul weather. Anyhow - good looking grill guard. Depending upon how you attack it - either $297 or $315.

Falcon - your part# was just a tad bit off or the number has been modified since 2017. I'd give them a call and make sure it's a guard that will fit your tractor.

It does appear to be the guard shown in the pictures you posted.

 

[falcon5269]

oosik and Peter315, Thank you! Calling on Monday.

 

[falcon5269]

This ...............New Holland Guard Part # LDR138938 - New Holland Rochester

Peter, Thanks. I will call Monday.

 

[falcon5269]

Well - when somebody tells you where to find a grill guard - this is what you need to do to it. View attachment 682576

oosik, That is the perfect grille! Its what I had created in my mind. lol
Its what I will have, one way or the other! Thanks.

 

[Peter 315]

Let us know how you make out..........

 

[oosik]

I had a young fellow at our local metal working shop weld that up. He wanted to paint the right & left upper quadrants white with black eye balls. Then the protruding chunk bright red - like a tongue. I opted for plain old black. He was dissappointed.

 

[CoyPatton]

Well - when somebody tells you where to find a grill guard - this is what you need to do to it. View attachment 682576

Maybe it is just me, but I would do some mods on that with some ‘wings’ on each side angled toward the operator to protect the sides of the grille snd headlights.
It looks like a nice build, I just am seldom satisfied and often tinker with things for years.

 

[sequoyah101]

Mine came with one but try Messick's. That is where I find and buy all my parts. They usually have it in stock, ship quickly and communicate very well. I sometimes call the parts counter and have always gotten good friendly help.

BTW, mine bent already when I tried to pull the tractor out of a mud hole. I'll face up to a corner post and see if I can push it back in without breaking something. Not bent much but bent just the same.