Gresen Valve

[Desert Rancher]

I have a Gresen valve on a loader. Casting #2753 above outlet side and a K0?, 6, or 8 stamped on a machined spot on top of the relief valve. Anyone know the specs, what type of valve this is, or (most importantly) where I could get parts to rebuild it? It's paired with the pump listed in my other post above.

Thanks

 

[J_J]

I found this , might help some.

Hydraulic valve body for JD 450. - Yesterday's Tractor Co.

 

[Desert Rancher]

Hey, thanks J.J.
I'll see what I can ferret out

 

[oldnslo]

Parker purchased Gresen several years ago so you might try some Parker Distributors. Gresen was based in Minneapolis, MN. or a burb there of.

 

[Desert Rancher]

Thanks for the info. Went to Parker and there site had a note saying they no longer supported Gresen. Didn't find anything cross referenced to my valve. Was told it came with the "Dual" loader on the tractor by the last owner. I'll continue to poke around and see what I come up with. Keep you posted

 

[Brad_Blazer]

I got a replacement section for the Gresen valves on my backhoe from Baum hydraulics. I talked to a technical guy on the phone and he identified the part I needed. Depending on your problem it may be cheaper to replace the whole thing with a generic unit from Baileynet or Surplus Center.

Baum Hydraulics Corp

 

[Desert Rancher]

Funny you should mention that. Was just off looking at their website. Thought I'd give them a try in the next couple days. Sure appreciate the tip. I'll post back after I visit with them. Thanks again