54F and mostly cloudy @ 15:00 with the Sun occasionally peeking through. Calling for a high of 56F for the day.
If it hadn't rained early this morning I'd be tempted to go mow. As it is, I'll gladly settle for mowing tomorrow when it's supposed to be mostly sunny with a high of 66F.
Got the hopper feeder and the two tube feeders filled yesterday first thing. Need to refill one of the suet feeders.
Made a bit more progress up in the shop last night ... although was interrupted for a bit when neighbor stopped by and we shot the breeze for around an hour or so ...
Got the last piece all cleaned off and scrubbed and wire brushed. Then got the four holes drilled in it and got it welded to the angle it goes on:
Had to do a little grinding on the bottom after welding to accommodate the caster bracket:
Then worked on getting the welds on the interior of the frame ground off flush:
Then installed the caster on the bracket and fitted things up to get a better idea of how it all would go together:
Did some clean up on the t-bolts with a wire brush in a die grinder as well.
Finished up around 04:00 and loaded up the stove before I headed back down to the house so it hopefully wouldn't be too chilly up there today.
Today I'll get that bracket tacked up and welded on, along with the four brackets for the feet.
A little clean up with a wire brush after that and it will be ready to prime and paint.
UPS just delivered one of the wiper blades for the Sprinter, the one for other side should be here in the next couple of days via USPS ... hopefully before we get much more rain.
Hope everyone is having a Happy Hump Day ...
