Nice day today. Started out overcast and chilly, but sun finally came out and it warmed up. Unlike Saturday morning where 12° is predicted. No snow in the forecast.
Bought 10 ft step ladder at Lowe’s. Perfect fit for the church attic. Pushed 3 Ethernet cable’s up thru hole in sound room ceiling, got 2 to their locations. Drilled hole in soffit of porch/entryway. Walked on trusses in attic to get cable down the hole. To get to it from the access, I have to go over a duct, walk on truss , go under another duct while on trusses, get over some bracing, and walk the truss over the porch ceiling. Piece of cake. The 2nd one was close to the attic access, but straddled a duct there. For it I made hole in drywall (above drop ceiling) and ran a fiberglass chimney rod up. In attic tape Ethernet cable and feed back down thru the hole. Got a camera mounted and working on that one.
I got the new box for the porch camera later today, so just got the camera all mounted. Will install it tomorrow. Simple plug in the Ethernet cable, screw backplate to the wall and attach. Because of nothing to attach to on the soffit, Mount goes against the wall, and a short section of Ethernet cable is open against the box. I should drill a new cable access hole on top of the box, to hide and protect the cable. But it is about 11 ft above the ground, so not easy for someone to take out the cable. If they do, next camera at the door would catch it all.
The 3rd cable is up in attic, but a longer trek across the trusses to where it goes. I left that for another day.
The camera going up tomorrow will get all vehicles coming into our lot. A 4K camera.
The 3rd camera will look opposite direction at the parking lot.
We have people parking behind the building and drinking, some have done donuts in the yard. The door camera sees the vehicles but not getting as good a view.
When we got to the building, loud noise on the PA system. Still not sure what, but think it’s the mixer causing it. Unplugging all mics still has the noise. Noise is also passed to the PC audio input from mixer. Didn’t think to check the headphone monitor on the mixer.
Got the new 4K projector today, will play with it soon.
