Good morning!!!!

   / Good morning!!!! #154,241  
More hit or miss storms today high close to 90 heat wave breaks Thursday

prayers for all our Country
 
   / Good morning!!!! #154,242  
Washing machine inverter board died again. replaced 3 times so far. Garbage machine.

After my original Maytag washer died, we went through a string of short lived ones. I finally asked a friend that runs an appliance repair business what I should get. He reply was quick. “If everyone had a Speed Queen washer, I’d have to rely on refrigerator repair.”

I followed his advice, and he was right.
 
   / Good morning!!!! #154,243  
73 outside this AM. and, actually hazy....so for today Hazy, Hot and Humid. Mid 90's on tap, again....

Got rained on again yesterday. I should invest in a weather station as the pattern is totally different with these rain events from my memories of years gone by. We are one week away from mid-August, my lawns and pastures are still green, and yep...I can start cutting grass again. I have got the mower up to 3.5 and 3.75 inches and the grasses are still winning. Yesterdays thundershower dumped enough rain for me to drain all the horse grain buckets at feeding time. Brief, intense and welcome. But then the humidity kicked right back up.

I know others could use the weather (water) more than us.

I managed to get all my foam board up, and my electric back and working. Although the electric will have to be a new feed and panel sometime in the near future. My wife was concerned about me working in the thunder and rain but actually I was cutting foam inside and then running outside to hang it. LOL. Accurate measurements being the key. I just need to tape it up and can start on the vinyl.

On the cicada killer, that darn thing is so big and fast, it just freaks me out. Plus it is just in the wrong place...but....I am a pretty laid back person when it comes to live and let live. LOL.

Here is a shot, you will have to zoom in on it. The mound, burrow or nest, is about the size of my two hands put together for reference purposes. I think I was about 4-5 feet away from it, during the picture taking. Close enough. LOL.

cicadaKiller.jpg

And the ever present - Milk House project.

milkHouseSide.jpg

Hope all have a great day, and my hope for those ailing is to get better. Be safe.
 
   / Good morning!!!! #154,244  
We have owned Speed Queen for 6 or 7 years never worked on they just run
 
   / Good morning!!!! #154,245  
good morning all
another hot stormy one, reminding us it's August.

nothing planned for today until near dinner time when taking elderly neighbor lady across the street to her doc appt. She had an unsuccessful hip operation,
cdif or something nasty, has a wound vac, which I don't know what it is and not sure I want to. Mask on for sure in the car. Her son normally takes her but he is out of town
on large job. 5:30 appt, odd time, bet they run late. I always try to get first thing appointments. Will make sure I have a full Kindle before I go. Plus it should be height of thunderstorm then.
just a little adventure.

yesterday outside temp gauge on parked Volvo read 108 in the sun. Kind of weather very dangerous for little kids, animals left in cars.
I like the fact some Tesla's have a pet mode, or something that keeps temps within a certain range safe for pets when owner leaves car.
Whipper would learn to put his paw on the panel and turn that on...

not a bug lover, only big ones I like are butterflies.

in many parts of the world, those big bugs would go right on a stick into the camp fire.
Just a different kind of barbecue.
Not quite what I want for breakfast.
 
   / Good morning!!!! #154,246  
After my original Maytag washer died, we went through a string of short lived ones. I finally asked a friend that runs an appliance repair business what I should get. He reply was quick. “If everyone had a Speed Queen washer, I’d have to rely on refrigerator repair.”

I followed his advice, and he was right.

Yep, we went with basic speed Queen with mechanical dial a few years back. No issues yet.
 
   / Good morning!!!! #154,247  
RS, hope those giant rodents didn't eat too many of your hosta

gardeners here have to totally fence in their properties. Though after the township paid for cull that took out several thousand deer here, supposedly, I really don't see many
around. Once in a while I see the droppings and one definitely chewed on ends of my blackberry plants. So far they've left my hosta alone. I'd be really annoyed if they came and munched the front garden but so far that hasn't happened.
 

Attachments

  • IMG_1150.JPG
    IMG_1150.JPG
    4.4 MB · Views: 105
   / Good morning!!!! #154,248  
Good Morning.
It was 77 before 6am this morning. Dew point is 73, so it’s steamy, although I haven’t been outside yet. Chance of thunderstorms today, likely tomorrow.

Yesterday was very uncomfortable to work outside. I capture the charge in the old condenser and got it disconnected by 8 or so, put the forks on the tractor and moved it around to the front by the lane. Brought the new condenser around back. Cleaned the area for the new one, put a bucket on the tractor and went to the stone pile for some 2a to make a level area and set some patio blocks.
By then my buddy arrived and we set the unit in place.

IMG_9393.jpg


It’s the one on the left. I had the other heat pump running, so it was cool inside where we had to run the line set and mount the inside unit. Put up an easy up canopy for shade over the outside unit to do the wiring and connect the line set.

The old unit was straight AC and ran three inside units, the new one is a heat pump just does one that is upstairs. Originally the heat was from a propane furnace and the mini splits did the AC. About 10 years ago I added a 16 SEER heat pump and relegated the propane to back up duty. The new heat pump is 22 SEER, but only has a head upstairs. The plan is for the new unit to be the main source of heat and AC, with the ducted heat pump as the second stage, and the Propane as the 3rd stage or last resort.

At any rate, not too long after lunch, it was all connected, so we pressure tested the lines with 400 psi of nitrogen. It held pressure and no bubbles at the connections, so purged the nitrogen and evacuated it, it was tight and pulled down to 200 microns. Released the stored charge and fired it up. Wasn’t long until there was a steady stream of condensation.
IMG_9395.jpg


By the time I put all the tools away I was beat. Today I’ll clean up the rest of the mess inside, and put the music room back together and connect all the stuff I moved to remove the old and install the new.
But that is after breakfast with the professor.
Considering that it will be 95 with a heat index over 100, doing inside chores is a good plan.
 
   / Good morning!!!! #154,249  
Nice job popgadget. I’d love to come and help just to learn. I do have a set of manifold gauges. Before the EPA crackdown I used to add Freon if it got low. Might still have a bottle with some R22 out in the shed. Back then you could buy it at Pace, one of the early warehouse club stores. It later became Sams Club.
 
   / Good morning!!!! #154,250  
Good morning! 76˚ heading to 101-103˚ like yesterday. No rain, cloudless sky.

I got burned in cards yesterday not be able to get into my foot for 4 games, David will understand.

Ring doorbell (motion detector) went off at 3AM, the video shows either a large rat or a small possum on the front porch. He did not stay long.

I need to legally hand water some areas of grass that are suffering badly early this morning.

Getting cabin fever, I think everyone who is still active. Tomorrow, even in the heat, we will start our park project of cedarciding again with lots of hydration and breaks and stopping when it gets to 90˚.
 
Last edited:

Tractor & Equipment Auctions

2019 Chevrolet Tahoe SUV (A50324)
2019 Chevrolet...
2014 PETERBILT 367 (A52472)
2014 PETERBILT 367...
2016 Big Tex 24ft. T/A Flatbed Trailer (A50323)
2016 Big Tex 24ft...
2018 Nissan Pathfinder SUV (A50324)
2018 Nissan...
2023 Bobcat T66 (A50120)
2023 Bobcat T66...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top