Good morning!!!!

   / Good morning!!!! #115,191  
Thanks Ron, I believe later on the Yamaha 100 kart engine became a standard class too.

Good morning all. Weather is on the turn for us. The sky has been crammed tight with clouds for quite a few days, this morning a few gaps are showing. Can't be long now before a gap coincides with the position of the sun, maybe we will get enough solar gain to keep the matches by the woodburner in the box this evening.

It is 80 years since the Battle of Britain and yet the story is only just coming out that the knife edge outcome possibly only ended in favour of the allies because a 13 year old girl called Hazel was really good at mathematics, which is why Spitfires ended up with 8 instead of 4 guns. London Girl, 13, Who Helped Win The Battle Of Britain - NewsOpener

LS, neat upgrades on your tractor. I really admire the way you always finish projects so soon, it would take me many days (maybe years :ashamed:) to get around to painting with a matching colour :)

BEF, Clovelly harbour in your Dad's postcard is a beautiful place. Unless you have a boat, you can only get to it by walking down a long, narrow and very steep cobbled street, I wonder if he remembers that ? Had a look online and the Red Lion is still there, it has just reopened this week after the Covid shutdown

What a gifted person Hazel was. So many pieces to the puzzle to the BoB.

good morning all
74 going to 93 today
still have moderate headache and upset stomach but can deal with it.

Found out there is a very nice rv campground about five miles away here in Greenville, out in country. Bradford Creek Coach & RV Center
If rv does not sell this week, will consider that as an alternative. At issue is cumulative effect of chemo, and
remaining safe to drive, but if only ten minute trip, should be ok. Rv is pretty small, but so is this assisted living space and
I would save a huge amount of money every month doing that. I've lived aboard a boat for three years so small spaces are not
a big issue, particularly if I have a comfortable seat to sit in. I would need to find a spot for this full size pc, working off a laptop was challenging
though many do it. Bigger keyboard and screen really make things better for me. Siblings think rv life is a bad idea, it's just too unusual for them.

iron and compact ironing board came in from Amazon yesterday, going to be domestic today and perhaps wind up less wrinkly...
otherwise a quiet day
hope your Friday is good and have some fun plans for weekend

It would be good if you could find a spot in the shade....or park under an awning.

Up until Loctite 518 got such rave reviews, I was using ThreeBond 1209, Kyle. Never had a leak with it, and it comes off fairly easily with a ScotchBrite green pad like you use in the kitchen. I can also tell you that Gasket Cinch is a joke, at least for engine work, as gasoline and oil will dissolve it. Hylomar has a good reputation, but I've never been able to get it to seal cylinder bases on my air cooled engines.:2cents:

My buddy, and the lathe techician swore about permatex #2. I know it does not fully harden, and they say it really helps ease disassembly.

with settlement set at 2pm today, just got pdf showing final reconciliation, and everything shown under Seller Pays column. Huh?
Realtor says that's how Wells Fargo says it must be shown...needless to say my attorney is going over it carefully, the net to me isn't far off but
I wonder what games WF is playing. Their track record is pretty poor; at least lender and my bank are the same

Lou, thanks, I always seemed to run out of USB ports for the wireless devices, pc seems to have more, think I may pull my 15" laptop out and starting counting holes.
But keyboard I'm using now just fits my hands, was always making typos on laptop, and since it's not that old, not interested in buying another one.
wonder if laptop could handle some adapter where one in and four holes available...would it know how to sort that out?

This is the kind of stunt that drove my FIL to halt the deal, when we were selling our place. He would draw a line in the sand, inform them, and all 4 parties crossed it. We didn't have to sell. It was just a possible move to reduce my commute.
 
   / Good morning!!!! #115,193  
This is the kind of stunt that drove my FIL to halt the deal, when we were selling our place. He would draw a line in the sand, inform them, and all 4 parties crossed it. We didn't have to sell. It was just a possible move to reduce my commute.

Walking away from a deal is probably the most powerful tool you have.

When I bought this place, it was a short sale, with the title held by Bank of America. I wasn't in any hurry, so I made a low ball cash offer, and told them it was "best and final". They came back with a counter at a higher price. I told my agent to ask them what they didn't understand about "best and final". Three days later, they accepted my original offer, and here I am...
 
   / Good morning!!!! #115,194  
Good morning to all! Low of 66, going for 99 today... hot and dry! No rain in the 7 day forcast, only hot temps hovering at the 100 mark.

Drew, that sounds like a plan that could be a good intermediate plan... use the RV to get you independent, then have some time to plan the next step.

Kyle, glad to hear about your daughter... a big step for her to get back to normal.
For the gasket maker, my son swears by the Permatex Optimum, either black (high flex) of the grey(high temp).

Ron, as always, a beautiful picture! Most of the birds here come out early morning, get a bath in the pond, then go hide in the shade.

I did get a wing rack built yesterday along with a few fuselage holders. They will hang by their tails. At least that is the plan, I will see how it works out. Whatever I do today, it will be at a slow pace, due to the heat.

RNG, stay cool...gonna be hot out your way too... all those solar panels must be attracting the sun towards the SW !

Everyone have a great day!
 
   / Good morning!!!! #115,195  
RNG, stay cool...gonna be hot out your way too... all those solar panels must be attracting the sun towards the SW !

Let it shine, Ted! I had been trying to keep the A/C off as long as I could stand it, to save electricity and money. But as an experiment, I turned it on in the morning, before the house was even warm enough to trigger it. That's when I found out that the electricity from the solar panels was enough to keep up with the A/C demands, at least until about 5PM. And with the house already cool, the A/C didn't have to run much to keep it that way the rest of the day and overnight. It turns out that strategy actually reduces the daily power draw from the grid, and overall that saves money over not turning the A/C on until late in the day!:moneybag::moneybag:
 
   / Good morning!!!! #115,196  
Thanks for the suggestion, Rick, it's a good one. The CalFire guys have been friendly in the past, but they get a new crop each year and you never know. Worth a phone call. Not sure we still have a volunteer fire department here anymore. The firehouse survived the Camp Fire, but I think all the volunteers moved away. I took a closer look at those 2 1/2" fittings on the firetruck, and the one with the handle is actually the one marked as a suction line. So that's the one I need to match for the new hose. The sun was in a good spot to see into the tank yesterday, and what I saw wasn't good. The bottom of it looked like Kyle's yard, a mix of dirt and mud and RUST that looked like a dried up and cracked lake bed. I need to get that out of there before it gets into the pump, and I'm not sure how to do it. The access port is probably just big enough to get through, but I'm not sure how safe it would be in there from a breathable air standpoint.

Please don't get inside your tank! It should have a clean out drain on the bottom and hopefully you might use a pressure washer, with long lance, to remove what's in the tank. Maybe you can get truck parked where the tank drain is low point when you clean it out

Also see how high above the tanks bottom your pump suction is located?
 
   / Good morning!!!! #115,197  
Good Morning!!!! 73F @ 5:30AM. Plentiful sunshine. High 102F. Winds SSW at 5 to 10 mph.
Was out again at about 4:45AM looking for Neotech, this time with a pair of binoculars. Found it, just above the horizon, right where the Skywatch app said it would be. It was probably there yesterday, too, but too faint for my tired old eyes to see without some help. And too faint for my point and shoot Canon camera, even zoomed up to 40x.

Jay, I'm really glad you were able to figure out what was going on with Peg and get her straightened out. I can't blame her for not taking her meds, I hate pills. It's one of those adult things, though, to admit that the doctor does often know best. Glad, too, you can have a sense of humor through it all. Sometimes that's all it takes.

Thanks for the suggestion, Rick, it's a good one. The CalFire guys have been friendly in the past, but they get a new crop each year and you never know. Worth a phone call. Not sure we still have a volunteer fire department here anymore. The firehouse survived the Camp Fire, but I think all the volunteers moved away. I took a closer look at those 2 1/2" fittings on the firetruck, and the one with the handle is actually the one marked as a suction line. So that's the one I need to match for the new hose. The sun was in a good spot to see into the tank yesterday, and what I saw wasn't good. The bottom of it looked like Kyle's yard, a mix of dirt and mud and RUST that looked like a dried up and cracked lake bed. I need to get that out of there before it gets into the pump, and I'm not sure how to do it. The access port is probably just big enough to get through, but I'm not sure how safe it would be in there from a breathable air standpoint.

Sounds like your daughter has discovered one of the secrets to a happy life, Kyle. No surprise there; she has a good teacher/father!:thumbsup:

I take a small amount of comfort knowing that between the temperatures we are both experiencing, Eric, there is an average that is quite pleasant.:confused2:

Thousands of people moved into motor homes and trailers after losing their homes in the Camp Fire, Drew, and most of them were in the sub 20 foot size range. Most were in them for a year or more before they could find more normal housing. I'm sure the novelty of "camping" wore off pretty quickly for those folks, but most that I've talked to accepted it as a good first step toward a better life on the other end. It's a good idea to have an elevated level of care available as you go through chemo, especially not knowing how you'll react to each new treatment. But it's also a good idea to keep your options open, and get an eyeball on that campground to see if you could be comfortable there. Maybe all you need is someone to drop by in the morning and evening to bring you a meal and make sure you're OK. Even though that kind of service isn't cheap, relative to your current situation, it would be much less expensive. You'd also enjoy much more independence, and that really has no price.

View attachment 662796
First blood on the new Kubota. That's what's left of the outboard eye on the hydraulic top link. When I was shutting down for the day yesterday, I pulled the top and side links in as far as they would go, and slowly lowered the 3PH lifting arms to put the lower corner of the box blade on the ground. Then pushed the lifting arm (draft) control all the way down. That's when I heard a bang, and the eye got transformed into a hook no longer attached to the box blade. Looking at the cross section of the fracture surface, it was only a matter of time. There's not enough metal there. The eye contained a sphere that was cross drilled with two holes, one for 3/4" Cat 1 top link pins, the other for 1" Cat 2 pins. The sphere was so big it didn't leave much room for the ring that held it onto the end of the cylinder rod, so Kubota left the ring thin so it would still work with most of the 3PH equipment out there. But not work for long; I bet they're seeing a lot of these being returned. I'm probably just going to turn a new eye out of some 4130 bar stock, if I can find the stub I think I still have. But the real problem is that the hydraulics on the T'n'T are leaking down so quickly I'm having to fool with the controls every five minutes to keep the box blade from hitting the ground. At this point, I don't know if it's the valves or the cylinders that are leaking, so this morning when I go out to swap out the top link for a normal one, I'll pull in the side link cylinder all the way in and then disconnect the hoses. If it holds, it's the valve that's leaking. Then I'll hook the side link cylinder up to the top link valve and pull the cylinder in and disconnect the hoses. Then I can have a talk with the Kubota dealer on what to do next.

I've been unable to find a HomeKit compatible vertical blind to replace the broken one in the garage, at least not one I can afford, so I stopped in at Home Depot yesterday to just get a new head rail. I was surprised to find they no longer sell, at least in Kalifornia, head rails that use draw cords. It seems that too many Kalifornia kiddies were strangling on the things. Poor parenting, or perhaps just Darwinism at work?:confused3: I was looking at a couple hundred bux for a gen-u-wine Levolor one that would have to be custom ordered, but the clerk showed me a house brand rail he could shorten to the correct length. No draw cord, but it was only forty bux! It'll get me by until technology catches up and prices for the motorized version drop out of the stratosphere.

My consolation prize was finding a very nice, and inexpensive, Añejo tequila at Costco yesterday. Made for some very nice sipping on the back porch when I got home. Even better, I found four new-to-me Jimmy Buffett CDs in the parcel box, and the lizards and I enjoyed Banana Wind very much.:cloud9:

TGIF gang!:drink:

Those inexpensive head rails can work fine, just bear in mind it won’t be as heavy duty or smooth as a higher quality unit. What I do on those is spray them good with silicone spray and use a slow steady pull to open and close. They can last a long time with a little care.
 
   / Good morning!!!! #115,198  
2.1 inches of rain so far and it appears to be lightening up outside, wind is still gusting 35 or so.
I guess my grass will need a trim after this.
 
   / Good morning!!!! #115,199  
2.1 inches of rain so far and it appears to be lightening up outside, wind is still gusting 35 or so.
I guess my grass will need a trim after this.

Just hitting here now. Wind has not picked up yet. Guess no outside work today....
 
   / Good morning!!!! #115,200  
84F and mostly sunny @ 11:00. Supposedly the "feels like" temp is 101F ... :shocked:

Found a note from The Woman this morning when I got up that said she ran out of water while taking her shower this morning ... no real heavy water use yesterday so that's not good.

Haven't had any significant rain here in quite a while.

Did not make it back out last night after trip to Dunkin' so all that is on the menu for today.

Fortunately it can all be moved inside and done where it's cool.

Hope everyone has an enjoyable, productive, and safe day ...
 

Tractor & Equipment Auctions

2007 Isuzu FTR Truck, VIN # 4GTJ7F1357F700209 (A51572)
2007 Isuzu FTR...
2013 Doyle Dry Fertilizer Tender Trailer - Kubota Diesel, 3 Stainless Compartments, Side Discharge (A52748)
2013 Doyle Dry...
2015 Clarke Power Gen RC60D 47kW Towable Diesel Generator (A50324)
2015 Clarke Power...
UNVERFERTH 330 - 22-INCH EXTENTSION TUBE FOR BASE AND WING ASSEMBLY FOR RIPPER (A52748)
UNVERFERTH 330 -...
2003 GMC C7500 16ft Cab and Chassis Truck (A51692)
2003 GMC C7500...
2016 Big Tex 24ft. T/A Flatbed Trailer (A50323)
2016 Big Tex 24ft...
 
Top