Good morning!!!!

   / Good morning!!!! #113,361  
Done mowing for the day. Had to finish up with the Cratsman after belt came off scag and I didn’t want to mess with it.

IMG_1710.JPG

Poor flail, abandoned by the fence, LS in observer position by the house.

Dennis, have to wonder how those nobby tires on your cart would be on a mower.
 
   / Good morning!!!! #113,362  
MG,

Good evening all. 73F, mostly clear sky, calm wind. Minor cloud build up, light wind, high temp 93F. watched chapel online this morning, puttered on computer, no nap :( . Wife decided we were not going to stepdaughter's house for dinner, So I took their share of dinner over to them.

Good man ... :thumbsup:

Covid update: Cooke unchanged, Montague unchanged, Grayson unchanged.

Good news.

RS I did not realize the lens on welding helmets used batteries now.

Them newfangled auto-darkening "solar" helmets apparently do. The button batteries in the newest helmets are designed to be easily user-replaceable (mine was not ... but it still can be done apparently :D)

The one in my Hobart helmet that just died was supposed to last 5 years. I'm guessing it probably lasted 2x that.

I see TSC has some Hobarts on sale ... might just go that route for now, since I need a new pair of work boots anyways.

BTW - heard ya on the calipers (re: quality) ... was scoping out the Starrets and Mitutoyo's ... would love to have a set ... :thumbsup:

... and HFT was still out last I checked ... :eek:
 
   / Good morning!!!! #113,363  
Don’t know why one looks blue in the picture
This bench around 20 yrs old. There are 12 4 ft slats. It used to sit in a flower garden under a elm tree till tree died. Then it sat out behind the barn awhile, then I put the ends inside. Had to dig to find them.
I will probably use oak. Will probably buy some precut strips.
 
   / Good morning!!!! #113,364  
Done mowing for the day. Had to finish up with the Cratsman after belt came off scag and I didn’t want to mess with it.

View attachment 658915

Poor flail, abandoned by the fence, LS in observer position by the house.

Dennis, have to wonder how those nobby tires on your cart would be on a mower.

They sell bar tires for ZTs. Mine are low profile and not much clearance to fenders. Will have to research it.
I need blades sharpened, but haven’t taken time to do that yet.
Today was much nicer, cooler than yesterday.
That cart is another project, get it running good then sell it. It just takes up barn space. I’ve been trying the berryman b12 spray on it, hasn’t helped yet.
Then I need to rebuilt husqvsrna transmission and then sell it.
 
   / Good morning!!!! #113,365  
BTW - heard ya on the calipers (re: quality) ... was scoping out the Starrets and Mitutoyo's ... would love to have a set ... :thumbsup:

Keep an eye on Craig's List. Just before i moved up here, a young man was selling his departed father's shop tools, and I picked up two paper grocery bags full of Mitutoyo height gauges, digital calipers, dial indicators, micrometers, depth gauges, inch pound torque wrenches, thermocouples and readouts, and stuff I never did figure out what it did. All for seventy-five bux. Everybody wants the new, wireless stuff these days, and they're almost giving away 1st gen digital and dial based measurement instruments.
 
   / Good morning!!!! #113,366  
If I recall he was killed in the same crash as Patsy Cline. Love his voice.

Not the same crash, but both died in small plane crashes. Reeves was the pilot in his private plane which went down in heavy weather
 
   / Good morning!!!! #113,367  
2020-06-08, 0317

49 right now...high about 70.
Finished mowing the lawn and field yesterday. Pretty chilly, for this time of year...
 
   / Good morning!!!! #113,368  
mostly_gas
Thomas did she booby trap you because of Peanut's huff?
---------------------------
:confused: hmmm...now that you mention it that way. :eek:

You didn't have nap yesterday and I did. :eek:
 
   / Good morning!!!! #113,369  
56 high of 82 today low humidity. Got weed eating around the house done blew off side walks topsoil spread still short

Prayers for all

Drew prayers for you get well soon
 
   / Good morning!!!! #113,370  
49F clear sky upper 60's for high.

Outside chores done E muffin time. :licking:
Plans for today...Open area among spruces ground could use some leveling/smoothing,front loader rear blade just maybe ticket,because of the nice weather :cool2: all inside project going to town have been cancel.

Enjoy the day all.
 
   / Good morning!!!! #113,371  
Coffee done brewing. 48° with clear skies this morning. Heading to 82° with sunny skies. Did not get pond maintenance done yesterday. Back on list today. Was a perfect day to visit with son and his family. Brought all the fixings for BLT's and a bucket of potato salad. Also took my drone with me. DIL did a fly with it. Her comment. WOW, I can do this. GS and GD coming over next weekend to do house cleaning and couple of repairs I need to do around house. Also took one of my Camera's with me. GD likes taking pictures. She went around yard taking pictures of all the flowers.
YqbbgAH.jpg

Sassy has a message for me. Are you ever going to get me a haircut. I did trim around her eyes so she could see.
3C1205EA-3F72-47EE-B56E-26189555BE88.jpg
Finally numbers that add up. Almost . Oakland county CV cases 8,592. Recovered 7,486. Deaths 1006.

Drew, hope Dr./family conference call goes good. Prayers sent.

David, great view. Even with the lonesome flail mower.

RS, hope you get cylinder back together with no leaks.

RNG, I have lots of those tools. Not sure they will get listed on Craig's List.

Everyone stay safe and healthy.

Good Morning All.
 
Last edited:
   / Good morning!!!! #113,372  
Good morning.
Beautiful day yesterday and today looks about the same, low humidity and 80s. Seat time yesterday was on the Cub Cadet spray rig, finished a bit of building cleaning. Now it’s all rinsed and ready for glyphosate. That’s going to take a lot of time.

Boy you guys are busy, spreading dirt, building benches, breaking tractors!

Drew, I hope you are better each day.

Prayers for all.
 
   / Good morning!!!! #113,373  
I'd swear my 10 lb sledge hammer has put on 2 lbs over the last 5 years.

Yep, I was cleaning up my EGO lawnmower 4 days ago and discovered that it has almost doubled in weight since last year.
 
   / Good morning!!!! #113,374  
nice sunny day here in Greenville NC headed up in to upper 80's
Ron, that garden is stunning, looks like a professional garden, nice job.

waiting on breakfast and then PT. Got cleaned up, shaved, ready for day
Not confident about outcome of conference, they told me this Friday last week, but who knows, I'm pushing hard for independence.
Free Drewski! Two facilities are all of .8 miles apart, hope they don't say that occasional blood draws are sticking point. Both places draw blood.
By Wednesday I'll have been here a month.

Ron, that flower mix is what I tried to grow on my farm in places. It may be growing too and I'm just not there to see it, but yours looks simply perfect.
Butterfly heaven.
 
   / Good morning!!!! #113,375  
Good morning. It's a very humid 73° here this morning and forecast says 96° this afternoon with a "feels like" of 327° this afternoon ..and even hotter tomorrow. . We're on the clean side of T.S. Cristobal so .. no rain coming .. just heat. Prayers for those in the path.

I need to blow the dust, out of the radiators, on both tractors to assure good air conditioning this week. My "Radiator Genie" sure makes this an easier job. I use the compressed air nozzle most but occasionally give the radiators a good clean with water. The ends are at a right angle so .. you can get it between the radiator and A/C core easily.

Radiator Genie - Water & Air Cleaning Wands for High Efficiency Cooling Systems and Radiators - Blow Out / Wash Out Kit Amazon.com: Radiator Genie - Water & Air Cleaning Wands for High Efficiency Cooling Systems and Radiators - Blow Out / Wash Out Kit: Home Improvement

My supervisor let me know that her "Park" wasn't looking very "Parkish" so .. I let her know, in no uncertain terms .. that I'd get right on it .. and so I did.

IMG_1995.jpg

I need to get the rear finish mower ready to go and hooked up, on the LS, as there are plenty of areas I can't get the New Holland into.

IMG_0923.jpg

We're up to 22 total COVID cases in our county. Only 6 active, all quarantined at home. So far .. we've had no hospitalizations and no deaths.


Hope everyone has a great start to your week.

Prayers to all.
 
   / Good morning!!!! #113,377  
Was 59 earlier when out with the birds waking up. Now blue skies and headed to 85.

Ron, love that photo of the flowers!

Rick, my cheap HF air gun is falling apart, and since this is the at least the second time you've reco'd the genie, I ordered one.

Ate my bowl of cereal and now need to get back outside and take advantage of this weather.
 
   / Good morning!!!! #113,378  
Nice out this AM again. 66 heading to lower 80s. Moved some wood to the front porch yesterday. Took some more floor boards up. Need to insulate and finish the exposed new outside wall today. Scraper on the ceiling was a bust. They glued drywall over the original wood. Have glue strips running all over the ceiling. Looks like a job for chemicals now. Sigh.

Caught this trespasser on my side lawn last evening.

Have a great day all. Get well..be well. Be safe.20200607_193338.jpeg
 
   / Good morning!!!! #113,379  
Good Morning!!!! 56F @ 5:15AM. Abundant sunshine. High 84F. Winds NW at 10 to 15 mph.
Don't know what it is, but I woke up at 3AM sneezing my head off, and haven't stopped yet. Gonna be a siesta day for sure...
WU also says Butte County is now up to 63 CV19 cases, still only one death.

Beautiful flowers, Ron. Is that a real butterfly? I've never seen one that blue!

You're sounding stronger every day, Drew. A month already?:shocked: Keep your cool and you might get time off for good behavior!

Sounds like that new LS has you spoiled, David. Hope the filter comes in quickly.

Lots of movie stars jumping on the "defund the police" bandwagon. OK, so let's defund the Hollywood police department first, and see if they don't change their tune.:laughing:

Another cool day yesterday; started out with a flannel shirt-jack that hasn't been worn in a month. Was gonna switch the tractor over to the landscape rake, but went by the front dirt pile and decided to pick rocks for a while instead. Had bluetooth headphones on and listened to some music I downloaded off of youtube, stuff so new it's not out in album form yet. The nice thing about rock picking is it doesn't require a lot of thought. Except for the boulders. They take a little finesse with the FEL to get them to tip into the bucket.

rockPileKubota2020-06-07.jpg
I dunno what I'm gonna do with 'em, but the #1 rockpile is gettin' pretty big...

lizard2020-06-07Shirt.jpg
As I dug through the dirt, a lizard ran up to me and disappeared into a little cave under one of the rocks. It was a bigger rock I'd need the FEL to move, and I didn't wanna see the little bugger get squished, so I scooped enough dirt away so I could grab 'im. He didn't like it, and squirmed out of my hand and tried to get back under the rock. Dug him out again, and walked over to a pile of pallets to let him go, but he just wanted to sit in the sun on my shirt. That's when I noticed the bright blue markings in his belly, and colorful little dots on his back. He looked well fed, too. Used to have chameleons as a kid, and these lizards are even better: They feed themselves!:laughing:

Picked about two or three FEL buckets of rocks, to where I didn't see any more in the pile, then pushed the little pile into the big one to get it farther from the power pole. Then swapped the box blade for the rake, and was reminded I still want to get some kind of quick attach for the 3PH. Ran the rake for a while but it wasn't picking up much dead grass, as it seems the lift arms on this 3PH don't have enough float in them to let the rake self level, and it misses a lot of ground. That's also part of why it's so difficult to swap implements. Ran the rake for a couple hours, then knocked off for a late lunch. Not sure if I'm gonna rake anymore as it doesn't seem to be doing much good.

Had a job that needed a few holes for anchors in the concrete, and decided to finish up the afternoon on that. I'd noticed that the hammer drill chuck was loosening up and letting the drills spin, and it finally quit hanging on altogether yesterday after three of the four holes I needed. So this morning I ordered a new one, this time a rotary hammer drill that can also be used as a demo hammer. Hilti used to own that territory, but they seem to have shifted a lot of their production to China, and they're not what they used to be. I've gotten great use out of a Bosch angle grinder, and the pro line of Bosch rotary hammer drills get pretty good reviews, so I ended up with an SDS Plus model. It and a hand full of drills'll be here Friday.

2020-06-07Thundercloud.jpg
Long about 5PM the sky started gettin' dark again and I heard thunder. Another late afternoon band of showers that was gone in an hour. This one was trailing a rainbow as it disappeared to the southeast, though.

Hope everyone's week gets off to a great start!
 
   / Good morning!!!! #113,380  
Was 59 earlier when out with the birds waking up. Now blue skies and headed to 85.

Ron, love that photo of the flowers!

Rick, my cheap HF air gun is falling apart, and since this is the at least the second time you've reco'd the genie, I ordered one.

Ate my bowl of cereal and now need to get back outside and take advantage of this weather.

I guess they should be sending me commission checks .. huh?

They’re a bit expensive but IMHO .. really work well. The 90° ends are very helpful in blowing out the inside of engine air filters too. Though you still get filthy .. doing so.
 

Tractor & Equipment Auctions

EZ loader trailer (A56857)
EZ loader trailer...
2023 Chevrolet Tahoe SUV (A59231)
2023 Chevrolet...
1611 (A57192)
1611 (A57192)
HUSQVARNA RIDING MOWER 42IN DECK (A56859)
HUSQVARNA RIDING...
2017 Toyota Tundra SR5 Ext. Cab Pickup Truck (A59230)
2017 Toyota Tundra...
Kubota LA525 Front Loader Tractor Arm Attachment (A59228)
Kubota LA525 Front...
 
Top