Good morning!!!!

[Buppies]

View attachment 644482Another one

 

[Buppies]

I want one too!!!

Will get one of skid loader tomorrow

 

[hawkeye08]

They had the hand sanitizer stations near the doors at church this morning, advised virtual high fives, virtual fist bumps, etc to reduce spreading anything.. light turnout, but then again, I didn't stick around to see how many arrived late due to time change.

Stay safe, prayers for all.

 

[txdon]

They had the hand sanitizer stations near the doors at church this morning, advised virtual high fives, virtual fist bumps, etc to reduce spreading anything.. light turnout, but then again, I didn't stick around to see how many arrived late due to time change.

Stay safe, prayers for all.

Attendance was up slightly here even though the service is streamed live.

 

[mostly_gas]

Good evening all. 48F for the start, mostly cloudy and light breeze. Brisk wind again today, sky clouded up and overcast got thicker, and high temp was 63F. Chapel to start day, made wife's breakfast, and slow speed putter. Did get a nap in. No dog till Wednesday or Thursday. In truck twice and forgot to change clock. Pics from easter rid near Keervill 2017
Eric good to hear you are no longer sheepless, hope you enjoyed your break.
Drew, glad you are feeling well, sounds like possible stomach meds and bad dehydration may be your problem. Would be nice to know. Any possibility trip just gets delayed on you get handle on how contagious you are?
Bill agreed Sheepless in Shropshire does not cut it.
Ron hope you get pond done and golf cart has no issues.
RNG always enjoy company on rides.
Rick looks like too much clearance and tool was dull. Too much clearance because cut is too short, dull increases secondary break and burrs around hole. Surprised you did mot have Dremmel tool to work on it.
Roy, the youg deer were often calmer and closer to house in STL, bigger ones stayed farther down the hill
Ted hope you get your new tot er tool soon, Texas, at least North Texas will see a lot more rain next week.
Jay no crampons sounds good. Hope you get compressor sorted out.
Kyle, we always started with carbide burr or reamer Sorry about friends dog.
David nice pics getting the i's doted and t's crossed?
Randy, hope nothing hurt in fall. Thanks for the invasion review, glad you had good time.
Billy 540 sounds rough for a Costco bill!
Don thanks for link more money than I would have guessed.
Buppies thank for pic although pic #2 does not work(107871).
prayers for all

 

[lostcreekranch]

Good evening all. 48F for the start, mostly cloudy and light breeze. Brisk wind again today, sky clouded up and overcast got thicker, and high temp was 63F. Chapel to start day, made wife's breakfast, and slow speed putter. Did get a nap in. No dog till Wednesday or Thursday. In truck twice and forgot to change clock. Pics from easter rid near Keervill 2017
Eric good to hear you are no longer sheepless, hope you enjoyed your break.
Drew, glad you are feeling well, sounds like possible stomach meds and bad dehydration may be your problem. Would be nice to know. Any possibility trip just gets delayed on you get handle on how contagious you are?
Bill agreed Sheepless in Shropshire does not cut it.
Ron hope you get pond done and golf cart has no issues.
RNG always enjoy company on rides.
Rick looks like too much clearance and tool was dull. Too much clearance because cut is too short, dull increases secondary break and burrs around hole. Surprised you did mot have Dremmel tool to work on it.
Roy, the youg deer were often calmer and closer to house in STL, bigger ones stayed farther down the hill
Ted hope you get your new tot er tool soon, Texas, at least North Texas will see a lot more rain next week.
Jay no crampons sounds good. Hope you get compressor sorted out.
Kyle, we always started with carbide burr or reamer Sorry about friends dog.
David nice pics getting the i's doted and t's crossed?
Randy, hope nothing hurt in fall. Thanks for the invasion review, glad you had good time.
Billy 540 sounds rough for a Costco bill!
Don thanks for link more money than I would have guessed.
Buppies thank for pic although pic #2 does not work(107871).
prayers for all

"Rick looks like too much clearance and tool was dull. Too much clearance because cut is too short, dull increases secondary break and burrs around hole. Surprised you did mot have Dremmel tool to work on it."

Yep Mostly, I think we've got at least 3 Dremel tools but, I wanted to sneak up on the clearance, for the clevis pin .. so, I cleaned it up manually. I got the result I wanted.

 

[RedNeckGeek]

If I ever need to get one of y'all to come get me out of jail, it will be because I shot an alligator (and got caught).

Just as long as it's not the sheriff

 

[RedNeckGeek]

A picture for Ron

Dang, Buppies, yer doin' some serious (good) damage there:thumbsup::thumbsup::thumbsup:

 

[RedNeckGeek]

As requested...

In spite of the requisite shoveling, I had me some fun today.:laughing:

 

[RoyJackson]

2020-03-09, 0330

46 right now...high, in the upper 50's today.

That little .380 I bought has the stiffest slide I've ever encountered. One trick I've read is to lock it back (open) for a few days. That's what I'm going to do since it's too tough to rack right now... I'll post the results in a couple days.