Good morning!!!!

[txdon]

. . .PT then visit to Dentist for new crown. . .

WHAT, no pics,before installation? They are still pouring the gold and putting the jewels on mine, I will be King next week.

 

[ronjhall]

My opinion is that it is making a simple job complicated through electronics, that several reviews did not trust, and an $99 a year subscription.

Ditto
When almost 50% of the reviews are less than 5 stars. I start looking elsewhere.

 

[daugen]

thanks Don, the 99 subscription I missed and that's a deal killer. I'll just keep buying test trips but always would have liked a digital readout.

mad dash with blower out the lane and around and got leaves cleaned up just as rain started.
Feel good about getting something done after being away, and rain going to wash out this weekend.

little space heater warming my feet and legs, microwave neck wrap warming my neck,
this is more like it. I survived the garden club xmas luncheon and I'm all socialized out.
Glad I put a coat and tie on, they were all dolled up.
Quiche was awful but the chicken apparently was worse.
One wait staff for 40 people. Lukewarm boring quiche...
Vanilla ice cream for dessert. Not exactly an exciting menu.

time to watch a movie and keep my feet up.

 

[Thomas]

LS mt125 owner
While at the grocery store, found NY strip roasts on sale for $3.59 lb, so got 3 of them, 5-6 lbs each. Then saw whole chickens for.....$0.32 a pound....crazy...bought 4 of those. They averaged about $1.50 to $1.75 each for a whole chicken! Sale goes until next Tuesday..going to go get 4 more for daughter, we'll just freeze them until she can get them home.

Yesterday we smoked 2 of the 'New York' strip roasts using apple wood. They turned out fantastic. I had offered to do one for the neighbor at the same time. She called at about 2 pm and asked me if I wanted her to bring theirs over to smoke. I told her that I already started ours at around 10 in the morning, going for 4 hours already. SO.... today I'm firing it up again so I can do their roast.
..........................
:licking: I consider that harassment.

 

[Thomas]

Good day for working outside enough so 2/3 cutting down damage trees limbs tomorrow plan on finishing cutting other 1/3,have good size brush pile to burn tomorrow sooo I better get some hotdogs beer smooth cigar.

Enjoy the evening all.

 

[Thomas]

daugen
I survived the garden club xmas luncheon and I'm all socialized out.
Glad I put a coat and tie on, they were all dolled up.
Quiche was awful but the chicken apparently was worse.
One wait staff for 40 people. Lukewarm boring quiche...
Vanilla ice cream for dessert. Not exactly an exciting menu.
...............
Could it be your meat and potato home grown country.

 

[Kyle_in_Tex]

Need to get rid of my old pilot. Anyone have experience donating. Thinking donating to Make a wish or purple heart.

Cancer society sounds good. We gave a car to one that supports veterans

Ted, sounds good. Wish I lived nearby, id stop for a visit and possibly a sample of steak!

 

[wngsprd]

Bird - thanks for the recipe...sounds good and I'll try to make it tasty, to live up to its reputation.

PJ - I'll bet if it's possible to get that guitar done in a 3 day weekend, you'll get it done.

Thomas - sounds like a good plan for tomorrow.

 

[wngsprd]

BEF - geo seems to be always running on AUX HT...all else seems normal - think most likely problem is ground loop pumps?

 

[buckeyefarmer]

BEF - geo seems to be always running on AUX HT...all else seems normal - think most likely problem is ground loop pumps?

When my loop pump went out, my board flashed a lockout code. What brand of unit? I would not expect aux heat unless near 10° out. Make sure thermostat isnt set for aux heat.

 

[buckeyefarmer]

Son got home ok. Big backup getting into airport.

 

[LS Tractor Owner]

Just to add to the drool factor, wifey took all the bones from the roasts, boiled them up, and made a BIG pot of beef soup....MMM, MMM, Good! I'm definitely spoiled

 

[mostly_gas]

Good evening all. 42F for the start, overcast and light wind, very windy. Rain ended about1:30PM, wind is slowing down, and high temp is current temp of 47F. Today was conservation of energy day and dog sitting. Forgot to take for an afternoon walk. Did finish a Harry Bosch novel today.
Buckeye, glad to hear son got home ok.
Drew ok wretched food and no service, but did you have fun?
PJ, interesting project. Keep us updated.
Bird that is one rich recipe !!
prayers for all.

 

[RoyJackson]

2018-12-15, 0327

31 right now...pretty warm... High today about 40.
Only chore today is a dump run...guess I'll putter about the rest of the day

 

[Eric Salop]

Funny, since Eric and L4N posted on those eco fans, a TSCO ad was on the side of my TBN page with one. I looked at it...$99 and says they "make their own electricity" is that right?

Wng, the fan proudly states that it was Made in Canada, so I expected you to get them at a better price than me, that is quite a bit more than I paid for an 810 model.

It does indeed rely on electricity to turn the fan motor, which requires a large difference in temperature between the woodburner top and the cooler air pulled in the back by the fan. Sandwiched between the hot and cold surfaces is a material that has a pronounced "Seebeck effect" (producing volts from a temperature difference). Thomas Seebeck discovered this phenomena almost 200 years ago, though he didn't quite understand it was electricity, he was more intrigued it deflected his compass when he shorted the ends together (he had made a heat powered electro-magnet).

It is said that the great Italian engineer/chemist Alessandro Volta (the man who invented what we think of as a battery) made the same discovery a few decades before, but no one really took notice as he was making so many other brilliant discoveries.


This company makes a woodburner fan driven by a Stirling engine. Except for the fan blades it looks an elegant mechanism, if, like me, you are fascinated by that sort of thing. Couldn't justify on price alone, but maybe as a working artwork Stove Fan - Spread the heat away from your wood stove

 

[Eric Salop]

All summer long I have had an old, very battered hay rack that I was given, just waiting to be repaired. When I heard that snow was coming, I realised I should have sorted it much earlier in the year. Instead yesterday afternoon I was hunched over in a strong wind, trying to keep my hand steady enough to weld tubing that was more rust than steel. Maybe one day I will learn to manage my time better ... :confused3:


Bird, wish I was on your Christmas cake list.

PJ, no bugs, but still looks plenty to fret about building that guitar :laughing:

 

[Looking4new]

32 with a forecast high of 34F. Wind NW 18 gusting to 26 mph. Mainly sunny.

The kitchen window opens up at the corner of the deck and there is a platform for the cats to rest on before they come into the house. It is that platform that I feed the stray cat on.
Yesterday morning about 4:30 A.M. the stray cat (we named him Benny, as in Benny the Bum) walked right up to me and smelled my fingers. That is progress. I do not think he is feral. I think he has a home and just wants the extra food we are putting out for him. Maybe he is being mistreated at home. We will never know and he isn't saying. He certainly looks healthy enough.



Today is another energy conversation day.

Have a good day all

 

[Bird]

Just to add to the drool factor, wifey took all the bones from the roasts, boiled them up, and made a BIG pot of beef soup....MMM, MMM, Good! I'm definitely spoiled

Yep, as far as I'm concerned, that's a meal that can't be beat. I prefer cornbread with mine, but crackers, or even nothing at all with it is OK, too.

 

[daugen]

59 degrees in constant rain going up to 65 today as warm air and rain move Northward.
Two to three inches of rain predicted, on top of four inches I just poured out of the rain gauge.
Good day to stay inside, though I might go work in the garden shed since it will be warm enough.
With a metal roof on it, might sound good in there also.

Still have to fix problem with greenhouse floor being too low. Fills up with half an inch of water in heavy rainstorms, so I need to raise the floor
perhaps an inch. Bricks are too big; I was thinking just lay down ground contact 1 by 4s under the plastic floor, leaving half an inch between boards. I want to lift out the plastic grids and just lay something pervious in there to get height; have zero desire to dig the whole thing out again to lay brick. Plastic grids give secure very level base for current shelving. Cutting boards is easy and manageable for me. Trying to avoid any reraking, floor is now nice and level, just too low. Needs to be "temporary" installation, i.e. no concrete, and allow water to drain and not sit on floor.

hope you all have a nice weekend.

 

[Buppies]

40 high of 47 today rain most of the day snow is leaving

Prayers for all