Good Morning
64° with a high of 85 for today under sunny skies again.
Yesterday kept me occupied with a variety of tasks, not to mention an hour of backtracking looking for where in the world I left the digital inflator gauge I used to pressurize the PEX. I was about to give up when my wife walked over to the shop with it, asking me why I left it on the dining room table.
I hooked up the 3PT mower and mowed inside all the pastures, this view shows some of the fence wire that Dennis (BEF) came up and helped to install.
After I got finished with the tractor mowing, I dropped the mower and mounted the box scraper. It was time for lunch so my wife and I went out to lunch, and then to look at ceramic tile. When we got home, I checked the air pressure in the Lazer tires (reason I was looking for the inflator gauge earlier) and mowed all the fence lines in the pastures.
Once that was done, it was time to fill and box scrape the ruts from the concrete trucks and construction vehicles before the next round. Dropped the box scraper and put the tractor and Lazer away in time to get cleaned up for the airport authority meeting.
Meeting was fairly short, was over by sunset, so I figured I ought to take the little plane for a little sight seeing.
Checked out my construction site-
I took a fellow board member along for the ride, he took the pictures with his iPhone. I’m impressed with how light it appears on the ground, as the sun had already set.
I’m supposed to do some electrical work at the restaurant this morning, not sure what else I’ll get into.