Good morning!!!!

   / Good morning!!!! #94,041  
Coffee is done brewing. 48° with rain this morning. Heading to 71° with rain ending before noon. Got lawn cut and other small chores completed. Back to golf cart lighting project today. Too wet for weed killing.

Jay and Eric. Great pictures.

David, thanks for explanation on LP line bore job.

Don, I use a stick for push just about every piece of equipment I have that you push material into cutting tool. I have featherboards for my table saw, router table and band saws. But rarely use them. Job is done before remember to set them up.

Drew, hope your critter bite is healing.

Buppies, prayers for quick healing and results.

Prayers for all in need.

Good Morning All.
 
   / Good morning!!!! #94,042  
Buppies
Another one cut out big hole in face black eye waiting on results.
...........................
Thoughts and quick recovery headed your way.
 
   / Good morning!!!! #94,043  
47F partly cloudy mid 60's for high with slight wind.

Morning chores done time for e muffin. :licking:
Plans for today... dump run,diesel for tractor,critter food,afternoon remove old bridge install new walk bridge most of all don't get the tractor stuck,maybe watch little nascar,BBQing early evening.

Enjoy the day all.
 
   / Good morning!!!! #94,044  
Good morning! 75˚F very cloudy 80% chance of rain. The heavy rain is holding West of us so I might try a garden visit this morning.

As people move here and rent a garden they have no need for their garden tools and donate them to the garden barn. Over the past 15 year the barn is overfilled and this coming week we need to save the best and get rid of 50% of the accumulated tools.

That is not my hand in the router pic. It is another student's. Our instructors are very safety minded, only 50% have missing finger tips. They do have the hold downs for long boards to put on either side of the router but we were working with 8" pieces.

David, thanks for the play by play and thanks to Eric for the paver pic under the gazebo, nice gardens.
 
   / Good morning!!!! #94,045  
warm 71 going to 92. No relevant rain in ten day forecast continues, been weeks since we had a decent rain. At least I was able to stop mowing the lawn for a little bit.

Up since 3, since I slept yesterday afternoon.
Arm is swollen half way up between wrist and elbow, but overall swelling down, can now close my fist. Progress and onward.
I guess i need to wear gloves more...

another volunteer collards pick party this morning, likely the last. Church group from neighboring town. Pastor in 80's says his congregation
who got the collards the last time said, any more of those good collards? They were the best we've had.
Now I'm sure the good Pastor was trying his best to come up with a thank you but I was touched.
Frankly these collards are picked at about half the size of normal
so they are more tender plus there are different varieties that the recipients have probably not had before.
We are pretty much stripping the plants for the summer, I will bush hog the tops off, and see what survives into the Fall.

After dinner yesterday I got a little work time in and powerwashed a variety of open shed stored equipment
with layers of pollen and/or mold; felt good to get all that equipment cleaned up.

Rick, doesn't your big tractor lift that rear mower high enough to get under easily for blade changing?
Clearly you are a lot higher/easier to work on using the FEL.

for our musicians, I wish I were back in PA for this little event, a first for our Meeting. Not sure who all is coming.

"Rick, doesn't your big tractor lift that rear mower high enough to get under easily for blade changing?
Clearly you are a lot higher/easier to work on using the FEL. "

Drew .... the RFM (in pictures) is used with our 55 hp small tractor. I can raise it sufficiently to get under it to remove / install blades but, pressure washing, in that position, is an unpleasant task. Did that once ..... just once. Raising it up in the manner, shown in the picture, is best done lifting with grapple, as opposed to chain hooks on my bucket. I can position tractor behind the RFM and the grapple has the reach to hook up to the front side hitch. The first time I did this, I lifted from the front side of the RFM. This forced me to have to work directly under the raised grapple.
 
   / Good morning!!!! #94,046  
It's 31° with a light snow shower this morning. Yesterday was in the mid 50's with a cold 15-20 mph wind and partly cloudy. It looks like today is going to be a about the same. The forecast shows cooler temperatures with a chance rain for the next seven days.

I did get a few little things done yesterday. I'll see what today will bring.

Hope everyone has a great day.
CWB.
 
   / Good morning!!!! #94,047  
Good morning to all! Low went to 40, only up to 64 today. Today another windy day with gusts to 40 mph! Yesterday afternoon had gusts kicking up the dirt from across the road again, I know for sure that his seed ended up on our property, strange plants growing everywhere....

The wind tapered off at around 9pm, then came back with a vengeance, waking me up around 11:30, then at 1am, then 2:30, finally said 'heck with it' at 4:30 and got up. Of course, just about sunrise it was barely breezy, not for long though, gusty again now. I'm still going to try and cut the grass, hopefully staying upwind from the discharge.

Buppies, prayers sent for a quick healing process and future good news.

Drew, prayers sent for expedited healing of your bite and decreased swelling.

David, glad to hear of your 'short line' success, hopefully the longer run goes easier!

Hope everyone has a great Saturday! I'm heading out to try to cut before the wind gets really bad!
 
   / Good morning!!!! #94,048  
Good Morning. It's 76°F and overcast this morning. Forecast is for 85°F this afternoon with possibility that we'll get storms this evening. Most are expected to be north of I-10.

The local Wildlife Management SIG is putting on a seminar, this morning, on Hummingbirds & Butterflies at the VFD Station. I'm going to see if I can improve what we're doing for the Hummers. I'm still waiting for Texas A&M to develop a "Super Hummer" that feasts on grasshoppers.

I need to finish mowing our 9 acre yard today. I got focused on chopping down wild flowers, in one of our pastures, the last couple of days and the grass in yard that I didn't get to, is now almost 12" high.

Buppies ....sorry to hear they're carving on you again. Heal fast.

Drew ....... work gloves! These are hard to beat and on sale for $3.99 often. When they get dirty, throw them in the clothes washer. I put mine on top of the dryer to dry.

Mechanic'''s Gloves X-Large

Don .... I think Eric is talking about fingerboards, like these on my router table.

IMG_4237.jpg

Hope everyone has a great Saturday.

Prayers to all.
 
   / Good morning!!!! #94,049  
65 high of 90 today beautiful garden pictures Eric

Hope the bite gets better Drew

Sodamo glad your project is a success

Another one cut out big hole in face black eye waiting on results

Prayers for all

Bupps, prayers for the best and quick healing.

Drew, watch that swelling. Hope it goes down fast.

Eric, thanks for posting those pics. I love gardens like that.

I'm still waiting for Texas A&M to develop a "Super Hummer" that feasts on grasshoppers.

They have.
IMG_20190517_111446595.jpg
 

Tractor & Equipment Auctions

Pallet of Car Parts (A47477)
Pallet of Car...
Leeboy 8500 Paver (A47477)
Leeboy 8500 Paver...
2015 UTILITY VS2RS 53FT REEFER TRAILER (A53426)
2015 UTILITY VS2RS...
12' Container (A53316)
12' Container (A53316)
2018 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER (A56138)
2018 FREIGHTLINER...
2007 Ford F-150 Crew Cab Pickup Truck (A55788)
2007 Ford F-150...
 
Top