Tires Good Average Air Pressure

[Al Mac]

I have turf tires on the B2920.
What is a good all around air pressure (front and rear) for cutting grass (MMM) and some FEL work with a weight box on. Do they have to be at max pressure or a little softer for some flex.

Al

 

[Rocky Hoffler]

I would go with recommend tire pressure in owners manual

 

[ericb2400]

I don't have terfs on the rear I have a wide W tread "tera Max" I believe and terfs on the front. I run 8 to 10 on the rear and what is stated on the tire on the front.

 

[SPYDERLK]

10psi except when using the FEL. Then 20 in the front.

 

[PHILIP8N]

Check that the manual matches the ply rating on tire, and that tire manufacturer matches what is in manual. This was not same for me. When USING FEL, I run max pressure on front tires as listed on front tires. When mowing, I use lower pressure as listed in manual. Philip.

 

[Al Mac]

Tks for the input.
While the manual states 23 psi front and 20 rear. I have played with it for the last couple months and have the fronts at 20 psi and the rears are at 15 psi. I was thinking I was going to light on pressure but some others are on the same page.
As I do a lot of mix work like some others I think the fronts are close but I will play with the rears a little more.

Dam I thought I was going to light on pressure but again this forum has proven it's value.


Al