Going back to dealer!

/ Going back to dealer! #41  
new bucket will make world of difference
 
/ Going back to dealer! #43  
wait a minute you are going to pay for a new bucket... just for more pulling force? huh?

me thinks ya need to go look at some of them... tree pulling threads.

FEL = lower pressure, compare to other methods.
 
/ Going back to dealer!
  • Thread Starter
#44  
wait a minute you are going to pay for a new bucket... just for more pulling force? huh?

me thinks ya need to go look at some of them... tree pulling threads.

FEL = lower pressure, compare to other methods.

Yup.. no tree's to pull here...
 
/ Going back to dealer! #45  
wait a minute you are going to pay for a new bucket... just for more pulling force? huh?

me thinks ya need to go look at some of them... tree pulling threads.

FEL = lower pressure, compare to other methods.

Like this?Luke's new tractor: https://youtu.be/9rQS6wh7ZW8
:)
 
/ Going back to dealer!
  • Thread Starter
#46  
Well I did it........

Off with the old...




On with the new...And shiny orange, my favorite color!




Give someone a great deal on the old one!

 
/ Going back to dealer! #47  
Did it help?
 
/ Going back to dealer!
  • Thread Starter
#48  
Did it help?

Yes it did.. much better pry power.

Still have to figure out how to work it better with the HST trans.. Apparently it operates different than with a gear drive
 
/ Going back to dealer!
  • Thread Starter
#49  
Did it help?

Hey Luke... tell me more about that tree grabber thing in your video... manufacturer, sizing, price.. that thing looks awesome!!!
 
/ Going back to dealer! #50  
Yes it did.. much better pry power.

Still have to figure out how to work it better with the HST trans.. Apparently it operates different than with a gear drive


On an hst if you need more power you up the throttle and back off the go pedal..
 
/ Going back to dealer! #51  
Hey Luke... tell me more about that tree grabber thing in your video... manufacturer, sizing, price.. that thing looks awesome!!!

It's a Bradco Jawz tree and post puller. These videos are without any 3pt ballast. With 1000lbs of concrete plus the loaded tires it will pull even larger trees. Very low impact compared to a backhoe. Pull and shake out the roots over the hole. I've found that if I curl the "bucket" I get the highest "break out force" (3100lbs on my loader). If you combine the curl with driving forward you combine the forces to some degree for even more force. It really is very impressive. Way more capability than I would have guessed. If you have overgrown woodlands it is a useful tool.

https://youtu.be/kVtu03glaiE

It's expensive (like $3k+). I got it for about $2k because my Kubota dealer is awesome. I thing Everything Attachments sells them too. You can find multiple build threads on TBN and cheaper manufactured units online. Most of them have one stationary and one moving jaw. I wanted two moving jaws and good visibility because I also use it for moving and placing boulders. After much thought I decided that this tooth pattern was best (but I've only ever used one).
 

Attachments

  • ForumRunner_20150709_183653.png
    ForumRunner_20150709_183653.png
    780.1 KB · Views: 93
  • ForumRunner_20150709_183638.png
    ForumRunner_20150709_183638.png
    877.2 KB · Views: 94
  • ForumRunner_20150525_134259.png
    ForumRunner_20150525_134259.png
    578.2 KB · Views: 95
  • ForumRunner_20150525_134246.png
    ForumRunner_20150525_134246.png
    484 KB · Views: 87
  • ForumRunner_20150525_100653.png
    ForumRunner_20150525_100653.png
    531.9 KB · Views: 81
 
Top