glow plug wiring

[Dave M7040]

the picture on the left has a wire hooked up to round item, don't know what that is, but I found this hanging loose under tractor. the yellow wire goes to the solenoid, and the other wire goes to switch. I found that round item and it looked like it hooked up to it. it had two terminals on it that fit. I learning.

Possibly engine stop solenoid.

Dave M7040

 

[coolreinfarm]

Looks like a oil pressure sending unit being that it's piped to the engine block.

 

[Dave M7040]

Looks like a oil pressure sending unit being that it's piped to the engine block.

When I looked for an engine stop solenoid on ebay, the one for that tractor appeared to have a cable with sheath coming out of the solenoid and that is why I made that suggestion.
Dave M7040

 

[coolreinfarm]

It's hard to tell with the angle of the picture if it's connected to the block or the inj. pump, my 385 engine has a manual stop cable at the inj pump.

 

[blegdleg]

Dose anybody know where i can get the switch assembly on the middle pis. Need Help

 

[coolreinfarm]

Call Tommy at Affordable Tractor, he might need that picture they are on the web.

 

[blegdleg]

I found out where the two wires went to. They went to the clutch safety switch.
Thanks all.