Gill box scraper

[TomLuft]

Recently purchased a Gill box scraper. I am looking for a new blade as this one is worn out. There is no model number on the scraper. The blade is 60 " wide. The hole patern is hole 1 , 2" from end then 13 3/4 " between hole 1 and 2 , then 13 3/4 between hole 2 and 3 , then 13 3/4 between hole 3 and 4 , then 13 3/4 between hole 4 and 5 . Then 2" to the end. The scraper also has a swiveling back blade when operating in reverse gear. The holes take 3/4 " flush mount bolts. Any help in locating a new blade is much appreciated.

 

[Halftrack]

Has the blade been reversed (turned over) to utilize the other cutting edge?

Check with FASTENAL for the recessed bolts.

 

[TractorTech]

What is your model number? Look on Messicks under Woods and plug in your model as Woods bought Gill.
A couple of possibilities are R1032 or 32295

Woods #R1032 60" CURVED CUTTI blade link

Woods GB60 Box Scraper (Woods) Parts Diagrams box scraper link

 

[TomLuft]

Has the blade been reversed (turned over) to utilize the other cutting edge?

Check with FASTENAL for the recessed bolts.

Thanks, good info

 

[TomLuft]

Thanks. Good info