Don't be mad at Dad for to long!
Gator XUV, 2009 vs 2010
- Thread starter RedHawkRidge
- Start date
- Views: 40594
Don't be mad at Dad for to long!
prosumequipment
Member
- Joined
- Mar 15, 2007
- Messages
- 47
Horicon, WI is what I have read.
So normally they make the newer model first?? Probably smart, that way they can iron any bugs out in the production line.. Where are they assibled at by the way?
Did they give you any idea of price? Are they going to offer any other cab configurations?
Thanks,
P.
ORMC They are made in Horicon Wisconsin now. They used to be made in Welland Canada. They said base price will be 1k more than a base 620I. There shouldn't be really any bugs to work out be that the chassis is almost the same as the 620. I think the hold up will be the electronics. The cab from what I know will remain unchanged.
Did they give you any idea of price? Are they going to offer any other cab configurations?
Thanks,
P.
ORMC They are made in Horicon Wisconsin now. They used to be made in Welland Canada. They said base price will be 1k more than a base 620I. There shouldn't be really any bugs to work out be that the chassis is almost the same as the 620. I think the hold up will be the electronics. The cab from what I know will remain unchanged.
ddivinia
Elite Member
jcmseven
Veteran Member
WOEII,
Yes, my dad is one of those people. I get so frustrated by him as he just does not pay attention to what he is doing. He is also an advocate of just running something unserviced until it dies then getting something else. Duct tape and cheap rope were the staples of his "shop" in the basement when I was growing up, and I have never known him to be able to fix anything that I have witnessed. My dad has many good qualities and was a good father to me growing up and I continue to respect him greatly as my father and a person, but this aspect was clearly not his strong suit. I had hoped he would take better care of someone else's equipment--but no go. Just the other day, I was visiting him (when I noticed my Gator had no parking brake) and was looking at his truck, a 2007 F150. My dad did well in his business and is in "comfortable" retirement. He always paid for things at the time of purchase. This time, though, because it was no interest, he took advantage of the Ford Credit 0% on his truck. He told me the other day that when/if he could no longer drive to either keep for myself or sell his truck. There might not be any truck left. The front bumper is caved in, the right rear QP is significantly damaged and he has innumerable scratches and dents in the doors and a cracked windshield. Mysteriously, he does not know how many of these things happened but has blamed everything from other drivers to acts of God, but never himself. He now has a pickup which he pays to requisite amount each month at no interest, but essentially has little value. I have told him I am coming to get my Gator in March, and by my calculations he will only use it about 10 hours until then--so since the JD Gator is one of the toughest pieces of AG equipment I have ever used he might not be able to reduce it to rubble by that time. Come to think of it, I might go early.......
John M
Yes, my dad is one of those people. I get so frustrated by him as he just does not pay attention to what he is doing. He is also an advocate of just running something unserviced until it dies then getting something else. Duct tape and cheap rope were the staples of his "shop" in the basement when I was growing up, and I have never known him to be able to fix anything that I have witnessed. My dad has many good qualities and was a good father to me growing up and I continue to respect him greatly as my father and a person, but this aspect was clearly not his strong suit. I had hoped he would take better care of someone else's equipment--but no go. Just the other day, I was visiting him (when I noticed my Gator had no parking brake) and was looking at his truck, a 2007 F150. My dad did well in his business and is in "comfortable" retirement. He always paid for things at the time of purchase. This time, though, because it was no interest, he took advantage of the Ford Credit 0% on his truck. He told me the other day that when/if he could no longer drive to either keep for myself or sell his truck. There might not be any truck left. The front bumper is caved in, the right rear QP is significantly damaged and he has innumerable scratches and dents in the doors and a cracked windshield. Mysteriously, he does not know how many of these things happened but has blamed everything from other drivers to acts of God, but never himself. He now has a pickup which he pays to requisite amount each month at no interest, but essentially has little value. I have told him I am coming to get my Gator in March, and by my calculations he will only use it about 10 hours until then--so since the JD Gator is one of the toughest pieces of AG equipment I have ever used he might not be able to reduce it to rubble by that time. Come to think of it, I might go early.......
John M
marksmu
Bronze Member
- Joined
- Jul 17, 2008
- Messages
- 50
- Location
- Houston TX
- Tractor
- 66Kubota M900 92 Hp, Ford 6610, Ford 1700
Wonder if it will be possible to swap out the belt housing on the old 850D to the new enclosed ones? My biggest complaint about the 850D is the belt gets wet and it slips like a son of a gun.
If its just a housing that is interchangeable I would buy one in a heartbeat.
If its just a housing that is interchangeable I would buy one in a heartbeat.
ORCM
Silver Member
Talked with my dealer the other day.. He told me that the rumor is that Deere got a bunch of '09 orders, and the had to re-tool the line right in the middle of tooling up for the 825.
Looks like it will be more into summer before we see any..
Looks like it will be more into summer before we see any..
nuumauka
New member
- Joined
- Mar 29, 2010
- Messages
- 7
- Location
- Milemarker 31
- Tractor
- Cat D6c, Kubota B3200 & backhoe, various utv's
Have the 2010 850d come out yet. Why are there no Camo models avaliable anywhere???
It's kinda like Tom Petty said... The waiting is the hardest part. Red2. You'll have to get it in parts. The 625I, 825I, and 855D are still about 2 months from being released last I heard. Camo models were a limited production. they only made what they had orders for. The good news is the the new models will also be available in camo.
Last edited:
nuumauka
New member
- Joined
- Mar 29, 2010
- Messages
- 7
- Location
- Milemarker 31
- Tractor
- Cat D6c, Kubota B3200 & backhoe, various utv's
Well I guess its worth waiting.
Just sold the 07 Ranger 700 efi 6x6. It is a complete piece of S! and am planning on going back to JD since we've always had good luck with them.
Does anyone know if the optional skid plate takes much away from the ground clearance? The local dealer doesnt seem to know much.
Just sold the 07 Ranger 700 efi 6x6. It is a complete piece of S! and am planning on going back to JD since we've always had good luck with them.
Does anyone know if the optional skid plate takes much away from the ground clearance? The local dealer doesnt seem to know much.
ORCM
Silver Member
So how long does it take after there "released" before they hit the dealers? June?
nuumauka
New member
- Joined
- Mar 29, 2010
- Messages
- 7
- Location
- Milemarker 31
- Tractor
- Cat D6c, Kubota B3200 & backhoe, various utv's
who are the "Gold Star" dealers? or how do you find them?
ORCM
Silver Member
Go to the Deere site, and do a dealer locator search. The results will show which dealers are Gold Star rated..
spcarves2
New member
the diesel model will have a clutch enlcosure..............
