Gasket for Simms Injection Pump

   / Gasket for Simms Injection Pump
  • Thread Starter
#11  
You were right Tinhack...no longer available. I had Don at Smith's Farm Equipment, a New Holland dealer, try his best.
Luckily mine is not damaged, I just have to play around and re-adjust a few times to get it where it doesn't leave a drip down the side of the block overnight.

But he did mention the same thing you did.....the kit to make your own and glue together.
He isn't a fan of RTV gasket maker in applications that involve fuel.

I'll have to check if Anglo Agri-Parts in the UK where I just had my fuel filters sent from can get any.
 
   / Gasket for Simms Injection Pump #12  
Any fuel shop will have a 3 cyl SIMMS side cover gasket.!!
 
   / Gasket for Simms Injection Pump
  • Thread Starter
#13  
Any fuel shop will have a 3 cyl SIMMS side cover gasket.!!
I don't have any fuel pump shops around me, But if I ever need pump work, I will be sure to contact you pumpguy

I did ask Anglo in the UK also, and they don't have them either.

Luckily mines not trashed.....I just have to fiddle with it a few times to get it to stop leaving a drip overnight.
 
   / Gasket for Simms Injection Pump #15  
   / Gasket for Simms Injection Pump #18  
How about I give u the part number and u can search it.?
Part number is:
Simms 500232 good luck
They go by number of cylinders.. I’m assuming you need a 3 cylinder side cover gasket.??
 
Last edited:
   / Gasket for Simms Injection Pump #19  
I don't have any fuel pump shops around me, But if I ever need pump work, I will be sure to contact you pumpguy

I did ask Anglo in the UK also, and they don't have them either.

Luckily mines not trashed.....I just have to fiddle with it a few times to get it to stop leaving a drip overnight.
Mail.
 
   / Gasket for Simms Injection Pump #20  
What I find strange is, u get a drip over night..
The oil level should not b that high.. it’s simply “splash oil” up there..
If all else fails, take the gasket/oring out of the groove and turn it over, that should give u a clean sealing surface to tighten the cover to..
BTW.. there are several fuel shops in Canada.. & as long as you have the p#, u should have no problem tracking 1 down.. at least a fuel shop doesn’t have an excuse.. lol
 

Tractor & Equipment Auctions

FORD 7710 TRACTOR (A54756)
FORD 7710 TRACTOR...
UNUSED RAYTREE RMVR76 - 76" HYD VIBRATORY ROLLER (A54757)
UNUSED RAYTREE...
2010 Toyota Prius Hybrid Hatchback (A53424)
2010 Toyota Prius...
2008 Ford E-350 Versalift 29N 29ft Bucket Van (A55788)
2008 Ford E-350...
1977 Ford F-100 Super Cab Pickup Truck (A55788)
1977 Ford F-100...
CATBKTSSL_78 (A55787)
CATBKTSSL_78 (A55787)
 
Top