FX22D HYDRO/TRANS FILTER

[R Barger]

I need to know the filter# and amount of hydro/tran fluid it takes for a FX22D tractor. Mine is milky looking but works fine. Thanks Rick

 

[winston1]

I see your profile shows you own a ym2002d. Me too! Did you trade it or just adding on? I can tell you the FX24D holds a little over 5 gallons on hydro/tran fluid. I am sending you a pm. Welcome to the forum. :welcome:

 

[R Barger]

I still have the ym2002d. I have owned it for 10 years with no problems. I just traded for the FX22D and don't know much about it. Thanks for the info. I just purchased 5 gal of hydro/trans fluid hope it will be enough. Must have got a little water in the fluid to make it milky. Thanks Rick

 

[normde2001]

Hydro filter is WIX/Napa (5)1203.

 

[bacrow]

I have an FX24D with FEL and mine held 6 gallons and hit right on the full mark on the dipstick. The manual says that it holds almost 7 gallons, but I think that would almost run it over the top. 5 gallons should at least register at the minimum mark on your dipstick.

 

[R Barger]

Your right I changed it yesterday and 5 gallon brought it to the minimum mark. Thanks