Gjamtrac
Silver Member
MY YM336D has always had slow hydraulics when it is below freezing.
I always use J20C hy-tran oil, but in the winter it takes a long time to warm up before the hydraulics lift the loader normally.
Last Fall I cleaned the hyd. screen, which had virtually nothing in it. I changed the cartridge filter with a new Baldwin B-2.
And refilled with J20C hy-tran.
But the hyds were still slow all winter until it gets really warmed up.
I am wondering if anyone out there has used a synthetic hy-tran fluid like Triax UTTO? Or automatic trans fluid (ATF)?
What are your thoughts?
I always use J20C hy-tran oil, but in the winter it takes a long time to warm up before the hydraulics lift the loader normally.
Last Fall I cleaned the hyd. screen, which had virtually nothing in it. I changed the cartridge filter with a new Baldwin B-2.
And refilled with J20C hy-tran.
But the hyds were still slow all winter until it gets really warmed up.
I am wondering if anyone out there has used a synthetic hy-tran fluid like Triax UTTO? Or automatic trans fluid (ATF)?
What are your thoughts?