FX22 need info

[YanmarFever]

Would anyone know the specs to torque down an FX22 head ?

I have the wrench in my greasy hand just waiting !

Ernie

 

[HoyeTractor]

I have the wrench in my greasy hand just waiting !

Ernie... go wash your hands! What are you doing working so late on a saturday night?

All I have at my disposal this weekend is my 3TNE84 service manual. I think they use the same head bolts but cant be sure from home. The 3TNE84 manual calls for 63ft/lbs to 67ft/lbs (8.7-9.3 kg/m).

Hope that helps,
Aaron
Hoye Tractor Parts
Contact Us
(940)592-0181

 

[YanmarFever]

Thanks Aaron, would you happen to know the rod bearing torque too?

I have never been busier in my life as this summer, working on the house, grand kids, tractors, im just spread to thin the last couple of months.

Ernie

 

[HoyeTractor]

My book shows a 9mm rod bolt & it torques to 4.5 to 5.5 kg/m. Also the head bolt shows to be a 10mm. I'd double check your bolt sizes to be sure the torques are the same. Good luck!

Aaron
Hoye Tractor Parts
Contact Us
(940)592-0181

 

[YanmarFever]

Thanks Aaron, I lent out my yanmar collection books to someone and they still have them

Thanks for the info

Ernie

 

[Mickey_Fx]

Thanks Aaron, I lent out my yanmar collection books to someone and they still have them

Thanks for the info

Ernie

It wasn't me.

Mickey

 

[blackd]

Wasn't me either Mickey. BTW, sold my FX24D with the bad block to a machinist. His plan is to sleeve the bad cylinder. Hope he has as much use out of it as I had.

 

[YanmarFever]

Thanks for the info, that FX22 now purrrs like a kitten !

 

[California]

Sure was a temptation to respond and refer you to that guy up in Molalla who knows everything there is to know about the FX's!

But I refrained ........

at least until you got it back together.