After 10 years of trouble free operation, my MF 1433 finally needs a repair!
The fuel line between the pump and the injector manifold sprung a leak and I'll need to replace it.
So part of my holiday will be spent doing this.
I found a near match for the line at the local auto parts store.
By near match, I mean that the inside diameter of the hose is about 1/32" smaller than the hose I'm replacing.
So my question is -
Will that slight diff cause any problems? I.e. is that going to put more stress on the fuel pump since it will be pumping against a slightly higher head?
Could it lead to premature failure of the pump? Will the smaller diameter size lead to performance issues?
Or am I over thinking this?
Happy Thanksgiving!
The fuel line between the pump and the injector manifold sprung a leak and I'll need to replace it.
So part of my holiday will be spent doing this.
I found a near match for the line at the local auto parts store.
By near match, I mean that the inside diameter of the hose is about 1/32" smaller than the hose I'm replacing.
So my question is -
Will that slight diff cause any problems? I.e. is that going to put more stress on the fuel pump since it will be pumping against a slightly higher head?
Could it lead to premature failure of the pump? Will the smaller diameter size lead to performance issues?
Or am I over thinking this?
Happy Thanksgiving!
