coupman35
Gold Member
Small question is there a fuel shute off valve before the filter so you can turn off fuel when changing filter . Or do you have to train the tank.
Fuel Filtter B2650
- Thread starter coupman35
- Start date
- Views: 3517
-
- Tags
- kubota b2650
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
There is a fuel shutoff built in the filter head, fuel flow shuts off automatically. RTFM.
beckmurph
Platinum Member
It shuts off on its own.
You will lose a little fuel, but not much.
You will lose a little fuel, but not much.
OP
coupman35
Gold Member
Great Thanks Guys
nbryan
Bronze Member
Manual says to not have fuel tank more than half full when removing fuel filter element to avoid excess leakage . Then to fill fuel tank after filter replaced and start and run engine for 30 seconds, then shut engine off, to bleed air from system.
oldballs
Elite Member
- Joined
- Dec 29, 2009
- Messages
- 4,484
- Location
- Kansas...USA
- Tractor
- Kubota B2620 , Case 448 , Kubota B2650
IIRC........I've changed the fuel filter with a full tank, as well as a 1/2 tank and it didn't seem to make a difference.... i.e. not much leakage either way.
nbryan
Bronze Member
Cool! I'm going to do my 200 hour service today, and it will be the first time I changed out the fuel filter. my tank is already at half so I'm not going to worry about it anyway.