Frontier Pallet Forks - multi-platforms?

[ddivinia]

I have forks for my John Deere 4720 with the 400x. I wish I had a set for my 5525 with the 542. Too many implement laying around. I saw that Frontier is advertising forks that will fit 3000,4000,5000 - anybody seen a set of the?

D.

 

[RollTideRam]

My forks are from a local welding shop. I bought them to fit a 200cx loader, but they also fit my current 300cx. They also have a lower pin to fit something bigger. JC

 

[ddivinia]

My forks are from a local welding shop. I bought them to fit a 200cx loader, but they also fit my current 300cx. They also have a lower pin to fit something bigger. JC

I will have to ask my dealer about it. I might sell my forks for my 4720 and get a set that will fit both.

I tried a knock off set that the dealer had - they were rusted before I even got them. I like powder coat too much.

D.

 

[mjncad]

I was looking at a set of the Frontier forks about a week ago, and wanted a pair. I noticed they had two sets of pins to accommodate different loader series.

Maybe when the stimulus check arrives...

 

[Chris2520]

I have forks for my John Deere 4720 with the 400x. I wish I had a set for my 5525 with the 542. Too many implement laying around. I saw that Frontier is advertising forks that will fit 3000,4000,5000 - anybody seen a set of the?

D.

I have a set of the frontiers your talking about , that fits a 2000 , 3000 or 4000 seris. thay work great. mine are the fixed rail slideing type.
thay are made very well , and rated to about 3500 pounds.

Chris.....

 

[slaveToHorses]

I have the Horst 3700, very similar to the Frontier.
They have upper and lower pins for both size loader bucket plates.
They fit my 300CX and the 245 (equivalent to the 500CX) loaders.

 

[KennedyDiesel]

With the skid steer forks and attach plates you have a true fitsall.

 

[slaveToHorses]

With the skid steer forks and attach plates you have a true fitsall.

The issue there is reduced visibility and added weight.