Sickle Bar Front mount sickle bar?
- Thread starter dwyleecoyote
- Start date
- Views: 37956
-
- Tags
- sickle bar mower
OP
dwyleecoyote
Member
- Joined
- Jan 22, 2011
- Messages
- 46
- Location
- Northern Ohio
- Tractor
- Ford 1320, Kubota 1140 CPX, Kubota BX2360
That's pretty cool. Not exactly what I was thinking, but probably way more useful. I didn't see anything about cost on there- any idea?
OP
dwyleecoyote
Member
- Joined
- Jan 22, 2011
- Messages
- 46
- Location
- Northern Ohio
- Tractor
- Ford 1320, Kubota 1140 CPX, Kubota BX2360
Better yet I could hang that thing on my backhoe and do some real sculpting...
Trafficman
Silver Member
Milkman,
Take one of those with a dead engine & hook it up to a QA for the mid mouth PTO or on the leading edge of the FEL. :2cents:
T-Man.
Take one of those with a dead engine & hook it up to a QA for the mid mouth PTO or on the leading edge of the FEL. :2cents:
T-Man.
Another option that I've thought about copying.... modifying for my needs .
http://www.tractorbynet.com/forums/build-yourself/184467-front-end-loader-weedwacker.html
http://www.tractorbynet.com/forums/build-yourself/184467-front-end-loader-weedwacker.html
jlsmith
Veteran Member
Sorry i didnt get back sooner. Just run another hose from one of your output remotes and that will work fine.
wvpolekat
Platinum Member
Really would not be hard to fab up. Get an old sickle bar and small hydraulic motor.
jlsmith
Veteran Member
That was pretty interesting. It would come in handy around my ranch trimming up some things. I think im gona look more into them. Thanks for sharing. :thumbsup:
OP
dwyleecoyote
Member
- Joined
- Jan 22, 2011
- Messages
- 46
- Location
- Northern Ohio
- Tractor
- Ford 1320, Kubota 1140 CPX, Kubota BX2360
Several years ago, I saw a front sickle made out of the header from a NH479 hay mower. That included the rolls. The wobble drive was hydaulically driven from a pto pump. Tractor was a JD 4430 and also run with a 4020.
That's a 9' sickle mower for you. Is that enough? Or, would you prefer to have a 12' 499? These mowers go thru 3/4 to 1" saplings all the time, but, they are not shredders. Its "cut once and its done cutting".
That's a 9' sickle mower for you. Is that enough? Or, would you prefer to have a 12' 499? These mowers go thru 3/4 to 1" saplings all the time, but, they are not shredders. Its "cut once and its done cutting".
