Front loader hydraulic question

   / Front loader hydraulic question #11  
The relief valve only works if you're moving the joystick on any of the functions and only for that function. If you happen to ram into a pile with all the spools in Neutral, there is no relief valve to protect anything.

Essentially, it won't protect the loader/tractor from external forces being applied. Something gave, in this case the hard line, otherwise something a lot more expensive could have broke.

These loaders valve don't have work port relief valves either, which would prevent this.
Ya, he says he had the grapple on the stump trying to pull (or dig, or pop) the stump out, so the valve should have been open in that case. Either way, that line should have held.
 
   / Front loader hydraulic question #12  
While working with the front loader grapple a hydraulic fluid pipe burst that controls lifting the bucket up. I’m going to contact my dealer Monday but was wondering what this specific piece is called so I can communicate to them what’s wrong. Also curious if this was my fault by trying to get a stubborn root out of the ground. Was I working it too hard? It’s the top (red) line that’s busted.

Thanks

Edit :let me know if the second photo is loading or not.
Take the old one off and any good hydraulic shop can make one up.
 
   / Front loader hydraulic question #13  
Simple fix, by just replacing with a hydraulic hose. There should be a shop that will fit the proper ends. Much cheaper than anything the dealer will come up with.
 

Tractor & Equipment Auctions

2025 JMR 40in Hydraulic Grapple Bucket Skid Steer Attachment (A50322)
2025 JMR 40in...
DITCH WITCH R300 STAND ON TRENCHER (A51242)
DITCH WITCH R300...
2020 John Deere 6110M 110HP 4WD Agricultural Tractor (A49461)
2020 John Deere...
2016 Toyota Prius Hatchback (A50324)
2016 Toyota Prius...
2019 FORD F-650 SUPER DUTY BOX TRUCK (A51406)
2019 FORD F-650...
2019 CATERPILLAR 299D2 SKID STEER (A51242)
2019 CATERPILLAR...
 
Top