Front Loader Brackets Ford NH 3930

[PM Wells]

One of the good friends that I had sent the drawings for the loader brackets for the Ford 3930 and other ford tractors, was good enough to send them back to me, so if you need these drawings to have brackets made, I can email them to you.

 

[ROUSTABOUT]

I would be glad to send the loader brackets drawings, but the email that contained the drawings was accidentally deleted from my computer, maybe someone that I sent them to would share them with you and with me.

Check your trash,bit stays there a while. Check your sent messages.

 

[PM Wells]

Check your trash,bit stays there a while. Check your sent messages.

They were completely deleted along with others, I do have the drawing back, from someone I sent them to earlier

 

[dbender]

Hi I just purchased a bushhog loader and would love the drawings if you still have them. It would save me a ton of trial and error. Thanks in advance. peachsqdogs@gmail.com. Thanks Daniel Bender.

 

[PM Wells]

Hi I just purchased a bushhog loader and would love the drawings if you still have them. It would save me a ton of trial and error. Thanks in advance. peachsqdogs@gmail.com. Thanks Daniel Bender.

Sent to you drawings

 

[dbender]

Thanks a ton. Saved me hours of head scratching.

 

[Eddie L]

Sent to you drawings

Would you please send me a copy of the drawings. I have a 1990 Ford 3930 2wd and I found a Bush Hog 2446 loader I would like to buy. The owner has brackets for another tractor but they won't work. eddielovitt@gmail.com

 

[Kscoggins89]

Could I please get a copy of the drawings as well to kscoggins89@hotmail.com
Thanks

 

[Mickeybpb]

If someone has the drawings, I would very much appreciate a copy. My email is mickeybradford53@gmail.com thanks for any help

 

[PM Wells]

If someone has the drawings, I would very much appreciate a copy. My email is mickeybradford53@gmail.com thanks for any help

I sent you the drawings for the Ford 3930 Brackets, hope they help you.

 

[CClayton]

A few years back I had a Ford NH 3930 that I wanted to install a front loader, It was a Bush-Hog brand loader The loader I had come off a Ford 3910 or similar model, and the brackets would not fit the 3930. After calling all around, I finally got in touch with a man at German-Bliss who was able to email me the shop drawings for the brackets for the 3930. I had a local welding, fab shop to make the brackets from the drawings and they fit perfectly. If anyone out there could use these drawings, I would be glad to send them to you.

Could I get a copy of them? Chrisclayton12@yahoo.com

 

[kiddtd]

12345

Know this is long ago post but wondering if you still have the drawings for the 3930 brackets. And if so can you email to me? Thanks kiddtd@aol.com

 

[mechcreech]

Hello I to am in need of these drawings would anyone still have a copy available jecreech@yahoo.com I would be mighty obliged Fine Sir