I looked at a L245 last night with a FEL at a used tractor dealer. He didn't know the history beyond the previous owner who he thought had owned it about 5-6 years. There was a weld on the left side of the frame about 6 inches behind the front axle. Is this something that happens commonly and should be ok or should I pass on this one? Thanks for any help.
Frame Weld on 1983 Kubota
- Thread starter jacm
- Start date
- Views: 1258
Hoeman00
Platinum Member
- Joined
- Jun 29, 2002
- Messages
- 872
- Location
- N Central Ohio
- Tractor
- NH TC35D/SUPER H&M/F-20/JD B&D/FORDSON/JD250 SSL
If the price is right and everything else looks
good get it.
If the weld either cracks or doesn't suit u,
grind and reweld or plate it on backside and
grind front smooth and repaint.
good get it.
If the weld either cracks or doesn't suit u,
grind and reweld or plate it on backside and
grind front smooth and repaint.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,667
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Could have been welded do to a stress crack or a bad factory weld.It may be worth taking a closer second glance of L245 also a test spin.
rdbrumfield
Veteran Member
Is that weld on the frame of the tractor or the loader?
jasonf
Silver Member
Is it a surface weld or is it welded on both side of the frame. Is ther a corresponding weld on the other side of the tractor. Could the tractor have started to crack in half. If the cracks looks deep I would pass....
