Ford Backhoe brackets

[City Farmer]

Hi all.
For whatever reason, I can't post in the private party classifieds so I'll put them here until we get that figured out.
I have the backhoe brackets and all the clamping hardware that attaches to a Ford 3400,3500,4400 and probably a few other tractors with a loader. These brackets are what you need to turn your loader tractor into a TLB. The brackets will work with the 750, 753 & 755 backhoes. If anyone is interested, send me a PM ($350 obo). I'll get some pictures in a few days. These are for the brackets only, no backhoe.

Andy

 

[City Farmer]

Here's some picture to answer a few questions that I've been asked. I took the pictures of my 4400. The brackets and arms for sale are exactly the same except in yellow.

1)The brackets run just behind the front axle to underneath the rear axle. They bolt to the ROP, fender or cab bolts.
2)The clamps/arms on top lock/hold the BH in position.
3)It's not bad putting them on, each bracket weighs about 175lbs or so.
4) I can have the BH off in 15min. by myself.
5) The attachment works with a 3ph but the lower lift arms must be removed.
6) $350 gets everything to mount the BH except the mounting bolts, 2 each side.
Thanks for the interest. Let me know if anyone else has anymore questions.
Andy

 

[bob.marvel]

Hello
I know this post is almost 10 years old, but did you end up selling the brackets/mounting kit? I am looking for a set.
Bob