BobShelton
New member
- Joined
- Jun 11, 2011
- Messages
- 1
- Tractor
- Ford 41 9N
My 3pt lift is not working well. It jerks and hard to control. I put new oil in it and it is over full. Would being over full cause this.
Ford 9N Question
- Thread starter BobShelton
- Start date
- Views: 950
-
- Tags
- ford 9n
ToadHill
Elite Member
- Joined
- Oct 18, 2005
- Messages
- 2,662
- Location
- Catt county New York
- Tractor
- Kioti DK35, Ford 8N, Oliver Cletrac
It sounds to me like the control valve is sticking.
If your lift goes in pulses, it is probably the pump. Mine is doing this which I know one side of pump is leaking. You can go online and find rebuild kits for it quite easily.
As far as over full on oil, biggest concern on them N's is axle seal leaking and contaminating your breaks.
Also, cylinder for 3 point maybe leaking excessively. Open one of the round covers at your feet, and watch for signs of this and, what looks to be air around pump.
As far as over full on oil, biggest concern on them N's is axle seal leaking and contaminating your breaks.
Also, cylinder for 3 point maybe leaking excessively. Open one of the round covers at your feet, and watch for signs of this and, what looks to be air around pump.