Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
How about you throw us a bone and tell us what kind of loader you have.. there are only.. oh.. a dozen or so that could fit.. all needing different brackets!!!!!!
In most cases, the loader front brackets will mount to holes under the front steering bolster..
depending on the loader.. it may also want bellhousing brackets ( there are 3 tapped holes on each side of the bell housing..
some ford loaders also use a couple holes in a tapped boss under the trans, as well as the fender mounting holes in the rear axle.
some use the bellhousing bolts at the flange where the engine bolts up.
got to give us something to go on here....
soundguy
In most cases, the loader front brackets will mount to holes under the front steering bolster..
depending on the loader.. it may also want bellhousing brackets ( there are 3 tapped holes on each side of the bell housing..
some ford loaders also use a couple holes in a tapped boss under the trans, as well as the fender mounting holes in the rear axle.
some use the bellhousing bolts at the flange where the engine bolts up.
got to give us something to go on here....
soundguy
jimmysisson
Veteran Member
- Joined
- Jul 11, 2005
- Messages
- 2,358
- Location
- W.Mass
- Tractor
- 1993 NH 2120 (the best), 1974 MF 135 (sold, but solid), 1947 Farmall A (bought, sold, bought back, sold again), 1956 MH50 lbt (sold, in 1980, darn it)
Pictures of the loader will help too, to see what's missing...
Jim
Jim
