Ford 6610 getting hot

   / Ford 6610 getting hot #1  

Mr Blue

New member
Joined
Nov 9, 2014
Messages
5
Location
Totnes
Tractor
6610
I have recently purchased a 1984 6610. I used it yesterday to do some grassing cutting with a 8 foot topper did the job well, but when I finished I noticed that the rear axle was really hot, is this normal or do I have a problem ?
 
   / Ford 6610 getting hot #2  
Make sure your remote valve levers are in the neutral position and not stuck in the raise or lower position.
Gary
 
   / Ford 6610 getting hot #3  
The brake wasn't left on was it? That'll heat up the rear end in a hurry.
 
   / Ford 6610 getting hot
  • Thread Starter
#4  
Thanks guys for your replies, but remote valve levers were in the neutral position and the handbrake was not on. Any other ideas ?
 
   / Ford 6610 getting hot #5  
Thanks guys for your replies, but remote valve levers were in the neutral position and the handbrake was not on. Any other ideas ?

Handbrake?
 
   / Ford 6610 getting hot #6  
I have recently purchased a 1984 6610. I used it yesterday to do some grassing cutting with a 8 foot topper did the job well, but when I finished I noticed that the rear axle was really hot, is this normal or do I have a problem ?

What do you mean by "hot". It's normal for the rear axle fluid to get warm just due to inefficiencies in the gear train and the hydraulic pump.
 
   / Ford 6610 getting hot
  • Thread Starter
#7  
It is not the oil that is getting hot but the metal work. I could not keep my hand on the rear axle because it was so hot. I called my wife over and she could smell the heat coming off it as she got close !
 
   / Ford 6610 getting hot #8  
Maybe a brake is stuck?
 
   / Ford 6610 getting hot #9  
Or a bad bearing. I would vote of brake dragging internally. Might take it out naked and do 20-30 180 degree turns and some breaking in reverse. The tractor may have set a lot.
 
   / Ford 6610 getting hot #10  
Or a bad bearing. I would vote of brake dragging internally. Might take it out naked and do 20-30 180 degree turns and some breaking in reverse. The tractor may have set a lot.

Is the hyd. oil cooler working?
 

Tractor & Equipment Auctions

CATERPILLAR IT28G (A52472)
CATERPILLAR IT28G...
1266 (A50490)
1266 (A50490)
New Wolverine72 In Skid Steer Brush Cutter (A53002)
New Wolverine72 In...
(8) 2 PLUG VALVES (A52472)
(8) 2 PLUG VALVES...
2013 MACK ELITE LEU 633 GARBAGE TRUCK (A51406)
2013 MACK ELITE...
FIRESTONE 20.8R42 REAR TIRES WITH WHEELS (WHEELS FITS GENESIS TG-T8000 TRACTORS) (A52748)
FIRESTONE 20.8R42...
 
Top