Ford 3400 3 point hitch problem

   / Ford 3400 3 point hitch problem #1  

snorulz

New member
Joined
May 11, 2009
Messages
7
Hello,

Sorry to post this in two spots but this section seems to get more action.

I have a Ford 3400 and the 3 point hitch is acting up. The hitch will only go all the way up or all the way down, you can't get it to do anything in between even if you only move the lever just a little bit. What would cause this problem? I have tried the draft control lever in both positions and it does not seem to help.

Thanks
 
   / Ford 3400 3 point hitch problem #2  
There is linkage either internal or external that cancels the lift control valve. If the linkage is maladjusted or disconnected it can do just as you describe.
 
   / Ford 3400 3 point hitch problem
  • Thread Starter
#3  
Thank You! I will look into it this weekend.
 
   / Ford 3400 3 point hitch problem
  • Thread Starter
#4  
I can't find this linkage in my ford repair manual. Does anyone either know what page it explains this linkage or how you adjust it?
 

Tractor & Equipment Auctions

2013 John Deere 640FD Flex Draper Head (A50657)
2013 John Deere...
2016 Big Tex 14ft. T/A Hydraulic Dump Trailer (A50322)
2016 Big Tex 14ft...
Super Material Lift MH1000 (A51039)
Super Material...
Caterpillar Front Glass (A50854)
Caterpillar Front...
Polecat swift 206R (A50322)
Polecat swift 206R...
2021 CATERPILLAR 416 BACKHOE (A50458)
2021 CATERPILLAR...
 
Top